|
Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
12-01-2021, 02:58 PM | #1 |
Not Yet Wild
Join Date: Oct 2021
Location: Texas
Posts: 6
|
No Reverse, wrong switch or not enough power?
Hello again buggies people. I am still having problems with my 1996 G8.
New Motor, new wiring, new EZGO FNR Switch. Batteries are going bad but I can still get about a mile out of them before it dies. I let it sit a few minutes and am able to drive a little further, it dies and I do it again until I get home. The problem: I have no Reverse. Is this due to retrofitting the EZGO switch or does reverse pull too many amps for my old batteries? Id like to get the proper switch but cannot find one at a reasonable price. Where should I look? Thanks, ~G |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
12-01-2021, 03:51 PM | #2 |
Gone Wild
Join Date: May 2012
Location: Rio Verde, Az
Posts: 7,170
|
Re: No Reverse, wrong switch or not enough power?
Probably the switch. Reverse doesn't draw more power than forward.
|
Tags |
fnr |
|
|
Similar Threads | ||||
Thread | Forum | |||
EZGO TXT 2007 vibrates in reverse after upgraded forward/reverse switch | Electric EZGO | |||
Wrong style ignition switch | Gas EZGO | |||
wrong page but I need your Brain power | Gas Club Car | |||
Mouting Switch's and doing it all wrong | Electric EZGO | |||
power spring install. something went wrong!!! | Gas Yamaha |