|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
09-15-2021, 04:38 PM | #1 |
Gone Wild
Join Date: Jun 2018
Location: Richmond,Virginia
Posts: 542
|
H/D Forward/Reverse switch
Working on a 1999 Club Car DS Series drive. I have a H/D F/R switch but my 2ga. cable ends are to big to hook up to switch. It is a Red Hawk
FR-021. Is there another switch that I need to get. First time rebuilding a Series drive cart. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-16-2021, 11:36 AM | #2 |
Gone Wild
Join Date: Jun 2018
Location: Richmond,Virginia
Posts: 542
|
Re: H/D Forward/Reverse switch
Talk to David at Revolution he got me straight
Sent from my iPhone using Tapatalk |
09-16-2021, 12:16 PM | #3 |
Gone Wild
Join Date: Sep 2020
Location: Greater Myrtle Beach Area
Posts: 151
|
Re: H/D Forward/Reverse switch
For anyone reading this in the future what was the answer?
|
09-16-2021, 12:33 PM | #4 |
Bonafide Nincompoop
Join Date: Dec 2015
Location: Charlottesburg Va
Posts: 8,987
|
Re: H/D Forward/Reverse switch
Tin shears or dremel bit to trim the excess from the ends of the terminals.
|
09-16-2021, 12:48 PM | #5 |
Gone Wild
Join Date: Jul 2018
Location: Ramer, AL
Posts: 1,447
|
Re: H/D Forward/Reverse switch
That's what I did....
|
09-16-2021, 01:44 PM | #6 |
Gone Wild
Join Date: Sep 2020
Location: Greater Myrtle Beach Area
Posts: 151
|
Re: H/D Forward/Reverse switch
Thank you....
|
09-17-2021, 05:56 AM | #7 |
Gone Wild
Join Date: Jun 2018
Location: Richmond,Virginia
Posts: 542
|
Re: H/D Forward/Reverse switch
David said to trim the slot with a Dremel. I thought that is what I need to do but was not sure did not want to screw up a new switch.
|
09-19-2021, 02:41 PM | #8 |
Gone Wild
Join Date: Jun 2018
Location: Richmond,Virginia
Posts: 542
|
Re: H/D Forward/Reverse switch
Was able to get back on this project today. This is a 1999 CC DS 48 volt series drive with a D&D motor and MCOR4 conversion Alltrax 500 amp controller.
I got everything hook up one wheel off the ground. Test reverse good put in Forward still went in reverse but faster speed. I know I have something wired wrong but I am at a lost. |
09-20-2021, 09:57 AM | #9 |
Gone Wild
Join Date: Jun 2018
Location: Richmond,Virginia
Posts: 542
|
Re: H/D Forward/Reverse switch
David came through again. I had cables hook up wrong. His customer service is outstanding.
Sent from my iPhone using Tapatalk |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Changing keyed Forward/reverse switch to rocker switch | Electric EZGO | |||
EZGO TXT 2007 vibrates in reverse after upgraded forward/reverse switch | Electric EZGO | |||
forward/reverse switch change to toggle switch | Electric Club Car | |||
No reverse. HD forward reverse switch needed? | Electric Club Car | |||
Forward Reverse switch melted on forward...have question about replacement part | Electric Club Car |