|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
04-29-2020, 10:27 AM | #141 | |
Not Yet Wild
Join Date: Jul 2019
Location: Isle of Palms SC
Posts: 34
|
Re: MCOR / Pedal Assembly Confusion Explained
Quote:
|
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-29-2020, 10:28 AM | #142 |
Gone Wild
Join Date: Aug 2009
Posts: 14,245
|
Re: MCOR / Pedal Assembly Confusion Explained
|
04-29-2020, 02:25 PM | #143 |
MOD of all BS!
Join Date: Sep 2011
Location: Florida
Posts: 17,477
|
Re: MCOR / Pedal Assembly Confusion Explained
Loved the Pot Box's. Still have to OEM ones in service today. '95 & '96 Series carts.
|
04-29-2020, 06:04 PM | #144 |
Not Yet Wild
Join Date: Nov 2017
Location: port huron michigan
Posts: 4
|
Re: MCOR / Pedal Assembly Confusion Explained
Have a 2012 cc president with mcor 4 having an issue runs fine unless i leave the run/tow switch on overnight next day cart runs slow until i shut run/tow switch off for a minute or so then runs fine again?? mcor problem?? or controller problem?? also sometimes when i turn the run/tow switch on reverse alarm wont turn on until i press the peday like 4-5 times???
|
04-29-2020, 06:42 PM | #145 | |
Gone Wild
Join Date: Aug 2009
Posts: 14,245
|
Re: MCOR / Pedal Assembly Confusion Explained
Quote:
The OBC (on board computer, for charging) goes to sleep after awhile, so pumping the pedal to wake it up is completely normal. As for your issue of running slow, that could be a failing speed sensor. Does it do it every time you take the cart out? |
|
04-29-2020, 06:49 PM | #146 |
Gone Wild
Join Date: Apr 2017
Location: SE TN
Posts: 2,226
|
Re: MCOR / Pedal Assembly Confusion Explained
So leave the run/tow sw on. No need to turn it off unless your going to tow it as the name implies.
|
04-29-2020, 07:18 PM | #147 |
Not Yet Wild
Join Date: Nov 2017
Location: port huron michigan
Posts: 4
|
Re: MCOR / Pedal Assembly Confusion Explained
Not every time just started happening lately batteries are only year and a half old and are at 50.2 to 50.9 after full charge
|
04-30-2020, 11:44 AM | #148 |
Gone Wild
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
|
Re: MCOR / Pedal Assembly Confusion Explained
The slow until you cycle the Tow/Run could be an indication the Solenoid is contacts are getting stuck (welded).
When that happens the cart runs at 50% power. |
04-30-2020, 12:51 PM | #149 |
Not Yet Wild
Join Date: Nov 2017
Location: port huron michigan
Posts: 4
|
Re: MCOR / Pedal Assembly Confusion Explained
should i just replace the solenoid?
|
04-30-2020, 01:17 PM | #150 |
Gone Wild
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
|
Re: MCOR / Pedal Assembly Confusion Explained
That is probably the best approach.
You could try to tap the Solenoid with a hammer wood handle when the cart is running slow to see if the issue was the contacts not releasing, but in the Precedent that is a difficult job due to the solenoid location. |
|
|
Similar Threads | ||||
Thread | Forum | |||
05 Gas Club Car Brake pedal assembly | Gas Club Car | |||
i need a picture of a columbia gas pedal assembly. please | Gas Columbia ParCar | |||
Brake Pedal Assembly | Electric EZGO | |||
Mcor & Controler Confusion ????? | Electric Club Car | |||
brake pedal assembly | Electric Club Car |