|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
08-10-2011, 07:22 PM | #11 |
Gone Wild
Join Date: Oct 2010
Location: Folsom, LA
Posts: 470
|
Re: Cart Shutters in reverse
I never did connect that wire. When I was in the process of changing everythng out I spoke with you ScottyB and you said that Half power reverse was for old ladies and wossies. I took your advice and neveer connected it. So that is not the problem. Any other ideas. I need to get this fixed before hunting season. It will basically only back up on flat land.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-11-2011, 07:26 AM | #12 |
Gone Wild
Join Date: Oct 2010
Location: Folsom, LA
Posts: 470
|
Re: Cart Shutters in reverse
Still looking for some help on this issue. I hope once ya'll wake up and get some coffee ya'll can help me figure this out.
|
08-11-2011, 07:53 AM | #13 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,408
|
Re: Cart Shutters in reverse
A series cart should not have this problem unless something is wrong with the contacts in the F&R or the cable connections at the F&R? Because the gears are the same for F&R in the diff...
So Pull the Switch cam out of the F&R and have a look at the back side connections and see if anything looks like it is getting hot? Black or red colored? Is that my switch cam or a Complete switch? |
08-11-2011, 09:16 AM | #14 |
Gone Wild
Join Date: Oct 2010
Location: Folsom, LA
Posts: 470
|
Re: Cart Shutters in reverse
I got the h/d f/r from another sponsor before I discovered you Scottyb. I'll pull it and check it out. I'll let you know what I find out. Thanks.
|
08-11-2011, 09:21 AM | #15 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,408
|
Re: Cart Shutters in reverse
Inspect it & the connections closely
|
08-11-2011, 10:08 AM | #16 |
......................
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
Re: Cart Shutters in reverse
Thats what I was thinking F/R, because you said you switched the wires on the F/R and it did the same thing, can you take some pics of that F/R switch and post them
|
08-11-2011, 10:15 AM | #17 |
Gone Wild
Join Date: Oct 2010
Location: Folsom, LA
Posts: 470
|
Re: Cart Shutters in reverse
I just missed your post Ribb. I pulled it and inspected it and it all looked fine. No hotspots visual to my eye. I can pull it again and take pics. I am confused as to what it could be. I tested the cart once I installed it and the same thing occurs. It is hard to describe. On flat land I can't just mash the pedal in reverse. If i do, it will kind of Buck and go a little and Buck. If I fether the throttle it will build up the speed, but will still buck. I will go pull the switch cam again and take some pics. I appreciate ya'lls help.
Thanks, David J. |
08-11-2011, 10:26 AM | #18 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,408
|
Re: Cart Shutters in reverse
David check to see that it is going all the way into Reverse. check that the stop on the switch cam is hitting the stop on the housing....
|
08-11-2011, 10:43 AM | #19 |
Gone Wild
Join Date: Oct 2010
Location: Folsom, LA
Posts: 470
|
Re: Cart Shutters in reverse
Here are a few pics. Let me know what ya'll think. To me everything looks fine, but I am no expert.
|
08-11-2011, 10:48 AM | #20 |
Gone Wild
Join Date: Oct 2010
Location: Folsom, LA
Posts: 470
|
Re: Cart Shutters in reverse
ScottyB, I can hear it hitting the stop when I work it from froward to reverse. I just figured all of this out while pulling the switch cam. I could physically see the stops and I figured out that the metal "L" bracket on the switch cam hits the plastic stop. I watched it before I tightened everything up and could see the metal meeting the plastic stops. It makes a distinct sound also. It is a very solid stop.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
94 club car shutters now nothing | Electric Club Car | |||
96 EZ-GO 36V Shutters in FWD but fine in REV | Electric EZGO | |||
cart "shutters" | Electric Club Car | |||
Cart Shutters under full load | Electric Club Car |