|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
07-28-2011, 08:08 PM | #1 |
Not Yet Wild
Join Date: May 2010
Posts: 65
|
Shifter Handle
My cart is a '96 EZ-GO TXT, 36v. It's a series cart with the little short, black "shifter" handle by the driver's right knee. My wife has trouble "shifting" from F to R. I've lubed it all I can and my conclusion is the handle's just too short for her to get enough leverage. So, I want to make a longer shifter handle. The shaft is about 9/16" square. Do any of you guys know what I could find that would fit over the shaft? Once I have that part in hand then I can fab up the rest of it to suit my taste.
Thanks for your ideas |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-28-2011, 09:26 PM | #2 |
no clue
Join Date: Sep 2009
Location: spicewood, texas
Posts: 3,308
|
Re: Shifter Handle
might try backing off the nut on the backside of the fnr switch 1/2 turn. did that and added this, altho i bought it. there are a bunch of beer handle ones out there. someone will pipe up.
|
07-28-2011, 09:37 PM | #3 |
Not Yet Wild
Join Date: May 2010
Posts: 65
|
Re: Shifter Handle
Madoc................where'd you get that one????
|
07-28-2011, 10:30 PM | #4 |
Gone Wild
Join Date: Jun 2010
Location: Central Florida
Posts: 2,757
|
Re: Shifter Handle
Kix, Upgrade that cart to a rocker switch on the dash.... then you don't have to worry about any handle...... Call me tomorrow or shoot me a PM and we can talk about it if you want.....
|
07-28-2011, 10:35 PM | #5 |
Getting Wild
Join Date: Jul 2011
Location: Myrtle Beach, SC
Posts: 142
|
Re: Shifter Handle
Is there a how to thread on that Rabbit?
|
07-28-2011, 10:36 PM | #6 |
Gone Wild
Join Date: Jun 2010
Location: Central Florida
Posts: 2,757
|
Re: Shifter Handle
as another option, you can always go this route as well:
http://www.jakesliftkits.com/liftkit...d-rxv-gas/7110 I can get you a slightly better price than what's listed on that site if that will work for you. |
07-28-2011, 10:37 PM | #7 |
Gone Wild
Join Date: Jun 2010
Location: Central Florida
Posts: 2,757
|
Re: Shifter Handle
|
07-28-2011, 10:41 PM | #8 |
Getting Wild
Join Date: Jul 2011
Location: Myrtle Beach, SC
Posts: 142
|
Re: Shifter Handle
OK, I have neither, so I hope you or someone else comes up with conversion for idiots.
|
07-28-2011, 11:00 PM | #9 |
Getting Wild
Join Date: Jul 2009
Location: New Jersey
Posts: 120
|
Re: Shifter Handle
i was thinking of something along the lines of using a breaker bar and connecting it to the shifter shaft thing and making a long shift handle that i can remove as a semi-anti-theft device.
my idea is kinda eh, just on the drawing board for a project when i'm bored |
07-29-2011, 08:09 AM | #10 |
no clue
Join Date: Sep 2009
Location: spicewood, texas
Posts: 3,308
|
Re: Shifter Handle
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Shifter handle | Members Rides | |||
G2 F/R handle | Gas Yamaha | |||
check out my new shifter handle | Electric EZGO | |||
F-N-R handle | Gas Club Car | |||
F/R Handle | Gas Yamaha |