|
|
|||||||
| Electric Club Car Electric DS, and Precedent golf cars |
  |
|
|
Thread Tools | Display Modes |
09-20-2013, 11:38 AM
|
#1 |
|
Not Yet Wild
Join Date: Sep 2013
Location: Hot Springs AR.
Posts: 1
|
what ohms should be at accelerator wires
i have a 2011 Stealth Apache 4x4 cart with club car parts. My readings at the accelerator pedal are:
power on no throttle yel/grn=6.35 yel/prpl=1.0 prpl/grn=5.41 power on full throttle yel/grn=2.09 yel/prpl=5.52 prpl/grn=5.33 the prpl/grn go to the solenoid, the solenoid will not click on and the cart wont move.....do i have a bad accelerator pedal? closest wiring diagram i can find is the 01 to 04 48 volt club car...but the colors of the wires are not matching...anyone know about the stealth cart.. |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Accelerator Pedal seems odd | Electric Club Car | |||
| what will 6500 ohms hurt | Electric EZGO | |||
| pulser ohms | Gas EZGO | |||
| controller sees over 5000 ohms | Electric EZGO | |||
| how many ohms for coil | Gas EZGO | |||
Linear Mode
