10-05-2015, 08:05 PM | #1 |
Not Yet Wild
Join Date: Jan 2014
Posts: 2
|
1993 FE290 oil seal
I need to R&R clutch side oil seal. Tips on removing would be appreciated.
Thanks in advance for any help. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-05-2015, 08:50 PM | #2 |
Not Yet Wild
Join Date: May 2015
Posts: 42
|
Re: 1993 FE290 oil seal
#1 you need a hardened clutch puller to remove the clutch
The crank seal is just pushed in, be careful when installing to not mess up the integrity of the new one |
10-06-2015, 08:09 PM | #3 |
Not Yet Wild
Join Date: Jan 2014
Posts: 2
|
Re: 1993 FE290 oil seal
Thanks I have the clutch off.
|
10-08-2015, 10:24 PM | #4 |
Gone Wild
Join Date: Jan 2015
Location: Stephenville, TX
Posts: 202
|
Re: 1993 FE290 oil seal
I recommend replacing with OEM seal. I replaced with aftermarket and it still leaked. Pulled motor again and replaced with OEM seal and now no leaks.
|
10-09-2015, 07:20 PM | #5 |
Gone Wild
Join Date: Aug 2014
Location: Akron, Ohio
Posts: 189
|
Re: 1993 FE290 oil seal
The old seal can be pried off and the new I find it works best to slightly oil it then lightly tap it back into the case.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Need Throttle Butterfly 1993 DS FE290 | Gas Club Car | |||
1993 FE290 rebuild...and more | Gas Club Car | |||
Hub seal | Electric EZGO | |||
97 fe290 head on 95 fe290?? | Gas Club Car | |||
1993 club car ds fe290 clutch rebuild w/pic | Gas Club Car |