Finally got my driven clutch off

[Orlando]

I have been putting it off for a year because the darn thing was stuck hard. I let it soak for weeks with Kroil and it wouldnt budge
I finally decided to tackle the job. I went through 6 - 4 1/2 inch cut off disks in a angle grinder and 5 disks in my dremel for the cutting up close to the engine. The center steel insert was rusted to the shaft, it wont hape agai n as I coated it with anti seize
Now that its over I wish I would have done this long ago
Heres whats left of the old clutch

[Dangerousdan55]

Do you put the cart in the water?
I've worked on 4 wheeler's that's been the water and not changed fluids or cleaned up very good. Rust inside the housings.
I wouldn't buy a used4 wheeler that has a snorkel

[Orlando]

I never did but dont know about the previous owner. The bolt that held the clutch on was pretty rusty. I actually drove it around for a year without a bolt hoping it would loosen up

[loflyer2880]

:

Originally Posted by Orlando

I never did but dont know about the previous owner. The bolt that held the clutch on was pretty rusty. I actually drove it around for a year without a bolt hoping it would loosen up

If you drove it for a year thats crazy stuck

[Granger ezgo]

Gotta admire your determination, many of people would've given up. Nice work!

[Orlando]

Originally Posted by Granger ezgo

Gotta admire your determination, many of people would've given up. Nice work!

Well once I started cutting I didnt have a choice