|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
05-14-2018, 11:11 AM | #1 |
Not Yet Wild
Join Date: May 2018
Posts: 1
|
New here looking at an EZGO Workhorse
Hello all, I am possibly looking at purchasing an 2000 ezgo workhorse, not sure on year. Seems to be in pretty good condition with electric dump bed, top, windshield and hitch. Owner says it needs a spark plug cable but no other issues. Tires looks a bit bad, any other issues I should look at when looking at it?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-16-2018, 07:12 AM | #2 |
Gone Wild
Join Date: Feb 2008
Location: Brooklyn, Michigan "Home of M.I.S."
Posts: 3,667
|
Re: New here looking at an EZGO Workhorse
It's all in condition and price, I always look at the wear on the floor mat near the gas peddle for a hint of hours on it, a nice WH them years with the robins 2 cylinder motors are getting scarce. There should be a tinfoil tag on the frame in the middle of the engine compartment or stamped on top the frame above the passenger side rear wheel that will tell you the year. I would replace the cable to see if that's what ever the problem is before I bought it.
If you can't find the tag, a hint on the year would be whether it had built in head lights, steel or plastic bed. This is a 2001 WH ST-350 (STs came stock w/4" lift).. Welcome to the board... SB |
05-17-2018, 02:01 AM | #3 |
British born Nincompoop
Join Date: Feb 2007
Location: United Kingdom
Posts: 2,461
|
Re: New here looking at an EZGO Workhorse
Here is mine LOL, i built this way back but still strong and reliable, i think it was a 2000 model but it is highly modified. again, like Stovebolts, it started life as a WH ST350, but it was modified to Mimic a Monster truck and still does the rounds at the Truck racing.
Things to look out for? Worn clutches (expensive) does it run well? start easy? rust. |
05-17-2018, 05:36 AM | #4 |
Gone Wild
Join Date: Feb 2008
Location: Brooklyn, Michigan "Home of M.I.S."
Posts: 3,667
|
Re: New here looking at an EZGO Workhorse
Nice Colin !!
|
05-17-2018, 07:44 AM | #5 |
British born Nincompoop
Join Date: Feb 2007
Location: United Kingdom
Posts: 2,461
|
Re: New here looking at an EZGO Workhorse
Thanks Stovebolt. I eventually made several like this for some of the UK Monster truck race teams. Once they saw mine, they all wanted one. The good part was free entry into any monster truck event in the UK. It was a blast. i also built custom carts for several UK circuit racing teams etc. Luckily my shop was based at one of the UK's oldest race circuits."Brands Hatch" in Kent. I may be able to dig out some old pictures and post them up some time.
My Signature was at one of the Truck events at the Santa Pod drag strip where the trucks put on shows several times a year. That particular cart was used to haul a 20 foot trailer loaded with the huge truck wheels and tyres. So, Bosgarage57, find a good one and keep it. bear in mind, the basic work horses had the same front cowel as the TXT golf buffy and no lift. I think the 800 model had the 295cc engine and the 1200 model had the 350cc engine, so look out for that one for more torque. They both also had i believe the 28 degree rear clutch to apply more torque to the wheels. So look for either a workhorse 1200 or an ST 350. all the running gear, frame front body and steering is all compatible with TXT carts so spares and accessories are abundant. you can fit an ST cowel to a TXT or Workhorse with a few rivets and a couple of hours time. Most lift kits etc for TXT will fit either. The only main difference is the 1200 and St models have a stretched frame and the TXT rear body will not fit. |
05-17-2018, 07:52 AM | #6 |
Gone Wild
Join Date: Feb 2008
Location: Brooklyn, Michigan "Home of M.I.S."
Posts: 3,667
|
Re: New here looking at an EZGO Workhorse
Brands Hatch.. cool.
|
05-17-2018, 10:58 AM | #7 |
British born Nincompoop
Join Date: Feb 2007
Location: United Kingdom
Posts: 2,461
|
Re: New here looking at an EZGO Workhorse
Lol. My old shop is just out of the picture. Bottom center, there are four grey roofed buildings, to the right of them are four more. Mine was the last on the right immediately in front of the small cart circuit. Wish we were still there but the recession hit us hard.
|
05-17-2018, 11:04 AM | #8 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,418
|
Re: New here looking at an EZGO Workhorse
2000 workhorse
|
05-17-2018, 03:15 PM | #9 |
Gone Wild
Join Date: Dec 2010
Location: Woodstock,GA
Posts: 1,088
|
Re: New here looking at an EZGO Workhorse
if he is saying it runs bad because it needs a spark plug! I would not buy it till I put a plug in it and see how it runs!
How many vehicles have been sold saying it just needs a set of plugs! and it turns out the engine is shot! |
05-17-2018, 07:48 PM | #10 |
Gone Wild
Join Date: Jun 2015
Location: NW Iowa
Posts: 1,669
|
Re: New here looking at an EZGO Workhorse
Agreed with gearhead if was as simple as a spark plug wire they would put it in and sell a good running cart if it is truly the issue
|
|
|
Similar Threads | ||||
Thread | Forum | |||
EZGO Workhorse Help | Clone Engine Swaps | |||
EZGO workhorse vs. Regular EZGO golf cart | Gas EZGO | |||
ezgo workhorse 800 | Gas EZGO | |||
96 ezgo workhorse | Golf Carts and Parts | |||
EZGO Workhorse 6 PASSENGER limo Setup for Briggs,Honda or Ezgo Motor | Golf Carts and Parts |