G29 Flywheel Question

Scance00$ · 05-26-2019, 07:18 PM

I have a 2011 Yamaha gas cart and am in the process of freshening the engine up because it has been smoking. When I got to the flywheel, there were quite a few fins broken off. My question is should I replace it? I use the cart to simply play golf at my home course. A lot of stop and go is pretty much the extent of use. Also, I bought a JN6-85650 flywheel off ebay for $50 bucks not even paying attention to the part number or realizing that the flywheel was for a G16. I thought I was scoring a hell of a price considering I was pricing them at $199 at the lowest. I'm going to assume this flywheel wouldn't work even though the engines between the two look the same. Any help would be much appreciated.

smallblock450sl · 05-27-2019, 08:09 AM

I see no reason the G16 (JN6) flywheel wont work. The engines use the same crank and TCI.

Scance00$ · 05-27-2019, 08:52 AM

That would be great if I could use the flywheel from the G16. I did notice that both used the same TCI, but figured there was a reason for different flywheels.

05-26-2019, 07:18 PM	#1
Scance00$ Not Yet Wild Join Date: Apr 2019 Posts: 2	G29 Flywheel Question I have a 2011 Yamaha gas cart and am in the process of freshening the engine up because it has been smoking. When I got to the flywheel, there were quite a few fins broken off. My question is should I replace it? I use the cart to simply play golf at my home course. A lot of stop and go is pretty much the extent of use. Also, I bought a JN6-85650 flywheel off ebay for $50 bucks not even paying attention to the part number or realizing that the flywheel was for a G16. I thought I was scoring a hell of a price considering I was pricing them at $199 at the lowest. I'm going to assume this flywheel wouldn't work even though the engines between the two look the same. Any help would be much appreciated.
Scance00$ Not Yet Wild Join Date: Apr 2019 Posts: 2

05-27-2019, 08:09 AM	#2
smallblock450sl Sometime's............ Join Date: Oct 2007 Location: Tacoma Washington Posts: 11,874	Re: G29 Flywheel Question I see no reason the G16 (JN6) flywheel wont work. The engines use the same crank and TCI.

05-27-2019, 08:52 AM	#3
Scance00$ Not Yet Wild Join Date: Apr 2019 Posts: 2	Re: G29 Flywheel Question That would be great if I could use the flywheel from the G16. I did notice that both used the same TCI, but figured there was a reason for different flywheels.
Scance00$ Not Yet Wild Join Date: Apr 2019 Posts: 2

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
2pg Flywheel Question. Is there more than one?	Gas EZGO
quick flywheel question	Gas Club Car
removing vanny flywheel question	Big Block Talk!
Quick flywheel question?	Gas Club Car
what reads the flywheel?? G2 motor question...	Gas Yamaha

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum