1995 Metalist Gasser thumping as it rolls?

[collers9640]

I purchased my first EZGO a few months ago replaced the engine and started driving it but it has lope to it a it rolls almost like a flat spot on one of the tires.
So I replaced the wheels and tires with new ones but that didn’t solve it.
I check the front end and the front hubs look to have been replaced recently. But the spindle bushing and tie rods are worn out so I just ordered new parts to fix the front end. But I don’t think the front is contributing to the Problem.
I’m having trouble pinpointing if it the left or right Though I pretty sure it the rear passenger side.

- Anyone have any tips for pinpointing the cause.
- Is it common for the rear axle shafts to bend?
- Does anyone sell new axle shafts
I looked for new axle shafts for gasser and all I’m finding are shafts for electric carts and 80s gassers
- Is there anything else I should check that could be causing it?


-

[CP241]

Put the rear up on Jack stands and run it to see if it does it while in the air. Also possibly a hub starting to strip out. Drivers rear side hub seems to be the one most likely to strip for some reason.