|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
06-14-2020, 09:26 AM | #1 |
Not Yet Wild
Join Date: Nov 2013
Posts: 28
|
ezgo gas with robin 295 engine wont run smooth
Hi all. Hope everyone ok in these crap times.
I could do with some advice. I have a friends buggy . Its an EZGO 2005 txt with the 295cc robin engine. The problem is that he can not get it to run smooth at walking pace. It jumps and stops and starts, seems like driving on the micro switch all the time. apart from this it runs fine. I have checked the plugs,and did a compression test (150 ) both equal,cleaned the carb all to no avail just can not get it to run smooth on tick over. Any advice would be greatly appreciated. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-14-2020, 10:51 AM | #2 |
Gone Wild
Join Date: Feb 2008
Location: Brooklyn, Michigan "Home of M.I.S."
Posts: 3,667
|
Re: ezgo gas with robin 295 engine wont run smooth
Does the motor surge at low speeds?
|
06-14-2020, 12:28 PM | #3 |
Not Yet Wild
Join Date: Nov 2013
Posts: 28
|
Re: ezgo gas with robin 295 engine wont run smooth
Hi StoveBolt
Thanks for the reply. No it dosnt surge just stops and starts. Will run fine with a bit more gas. but he wants it to run at walking pace so he can talk with his playing partner. I just can not get it to run smooth at low speed. |
06-14-2020, 01:12 PM | #4 |
Gone Wild
Join Date: Feb 2008
Location: Brooklyn, Michigan "Home of M.I.S."
Posts: 3,667
|
Re: ezgo gas with robin 295 engine wont run smooth
Sounds like it could be a linkage adjustment problem, hope someone here can help.
|
06-14-2020, 02:52 PM | #5 |
Not Yet Wild
Join Date: Nov 2013
Posts: 28
|
Re: ezgo gas with robin 295 engine wont run smooth
Thanks for the reply StoveBolt. seems as if as soon as the micro switch kicks in the engine starts up but will not run smooth at tick over. I have checked that the throttle plate is not moving before the micro switch clicks. Has me baffled.
|
06-14-2020, 07:56 PM | #6 |
Nincompoop village idiot
Join Date: Apr 2018
Location: Michigan
Posts: 9,682
|
Re: ezgo gas with robin 295 engine wont run smooth
Adjust the cable from the throttle to the governor and add a little slack to it. Sounds like someone tried to speed it up and probably adjuated the wrong stufd
|
06-15-2020, 01:39 AM | #7 |
Not Yet Wild
Join Date: Nov 2013
Posts: 28
|
Re: ezgo gas with robin 295 engine wont run smooth
Thanks CP241
I will give that a try and let you know how it gose. |
06-15-2020, 03:38 AM | #8 |
British born Nincompoop
Join Date: Feb 2007
Location: United Kingdom
Posts: 2,461
|
Re: ezgo gas with robin 295 engine wont run smooth
Listen for the micro switch to click, then adjust the throttle/cable, so that the butterfly starts to open after about an inch of pedal travel after the switch clicks. No need to remove air filter, just watch the linkage, that should sort it. As CP said, someones been trying to make it go faster!
Also check the redundant idle screw on the side of the carb, (do this first) If this has been screwed in, you will get the same symptoms. You can remove it and file it under garbage, its not required. |
06-15-2020, 09:51 AM | #9 |
Not Yet Wild
Join Date: Nov 2013
Posts: 28
|
Re: ezgo gas with robin 295 engine wont run smooth
Thanks for all the help gentlemen. I think im as close as Im going to get now.
You Guys are the best. Thanks again |
|
|
Similar Threads | ||||
Thread | Forum | |||
94 EZGO Robin 295 engine or parts | Golf Carts and Parts | |||
1987 ezgo robin engine | Gas EZGO | |||
How smooth does a g2 engine run? | Gas Yamaha | |||
98 EZGO gas 295 robin engine no spark | Gas EZGO | |||
robin engine wont ilde | Gas EZGO |