|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
10-21-2020, 02:59 AM | #11 | |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: 2019 drive 2 camber issue on new rims
Quote:
|
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-23-2020, 09:08 AM | #12 |
Not Yet Wild
Join Date: Mar 2019
Posts: 13
|
Re: 2019 drive 2 camber issue on new rims
|
10-23-2020, 01:52 PM | #13 |
Not Yet Wild
Join Date: Feb 2020
Location: Winter Garden, Fl.
Posts: 7
|
Re: 2019 drive 2 camber issue on new rims
When u set the toe are u jacking the front tires up off the ground?
|
10-23-2020, 04:25 PM | #14 |
Not Yet Wild
Join Date: Mar 2019
Posts: 13
|
Re: 2019 drive 2 camber issue on new rims
|
03-29-2022, 01:40 PM | #15 |
Not Yet Wild
Join Date: Nov 2021
Location: Liberty Hill, TX
Posts: 7
|
Re: 2019 drive 2 camber issue on new rims
I can't tell by the photo what you did. Which bolt hole & how did you modify it? I need to fix my negative camber too!
|
03-29-2022, 01:45 PM | #16 |
Not Yet Wild
Join Date: Nov 2021
Location: Liberty Hill, TX
Posts: 7
|
Re: 2019 drive 2 camber issue on new rims
I can't tell by the photo what you did & what bolt hole you're referring. Can you explain or draw an arrow? How did you elongate it? I need to fix my negative camber too!
|
03-29-2022, 09:40 PM | #17 |
Gone Wild
Join Date: Jan 2015
Location: Stephenville, TX
Posts: 202
|
Re: 2019 drive 2 camber issue on new rims
I placed a circle around the bolt where I elongated the hole in the strut. You only have to elongate the hole 1/8" - 1/4" to allow the wheel to rotate to be vertical. I did it by trial and error until I got the hole elongated enough for the wheel to be vertical. I elongated the hole by using a round file. It was a little slow but clean. I just placed a 2' level against the tire and when it was vertical tightened the bolt in that position.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Camber Issue on 2015 Drive Concierge | Gas Yamaha | |||
2019 Yamaha Drive 2 | Gas Yamaha | |||
2019 Drive Hesitates after Warm-up | Gas Yamaha | |||
2019 Ezgo RXV Camber Settings | Electric EZGO | |||
g14 camber issue | Gas Yamaha |