|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
01-25-2021, 11:41 PM | #1 |
Not Yet Wild
Join Date: Dec 2018
Posts: 11
|
G9 Cupholder Brace Removal
I've searched high and low and cannot find anything. I want to remove the cupholder brace. There are two bolts that secure it to the top of the inner cowl. I have removed those nuts and it still does not budge. I have also removed the two screws that attach the cupholder and removed the cup holder itself. My cart is a '91 G9AJ. Please help...
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-26-2021, 01:58 PM | #2 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,868
|
Re: G9 Cupholder Brace Removal
There should be 2 nuts at the top, remove them. Pull up on the upper cowel and rubber trim. pull the drink holder assembly toward you. There are just "pins" at the bottom that slide into rubber grommets.
|
02-05-2021, 06:37 PM | #3 |
Not Yet Wild
Join Date: Dec 2018
Posts: 11
|
Re: G9 Cupholder Brace Removal
Thanks, I will try this weekend. I put a Kolpin gun rack in mounted to the floor and I'm afraid it is going to rip the floor up. Gonna cut a slot at the top of the cupholder brace so I can brace the gun rack to the upper cowl.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Top Cross Brace | Electric Club Car | |||
WTB ezgo replacement cupholder | Golf Carts and Parts | |||
2003 Club Car DS - OEM Cupholder mount | Electric Club Car | |||
Ezgo marathon cupholder | Golf Carts and Parts | |||
WANTED: G1 cupholder | Gas Yamaha |