|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
03-25-2021, 05:29 PM | #1 |
Getting Wild
Join Date: Jul 2020
Posts: 75
|
Lowering 6" lift
My G16 came with a Jakes or Rhox 6" lift & the back is noticeably higher than the front, I'm thinking about cutting about an inch off of the rear lift-frame to make it less pronounced & am curious if anyone has done this or if I might run into an unforeseen issue. (I'm running 10" wheels with 22" tires)
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-27-2021, 11:35 AM | #2 |
Gone Wild
Join Date: Dec 2016
Posts: 167
|
Re: Lowering 6" lift
I had to do the same thing on my G21. Same lift as yours. It was so out of level i believe i cut about 1 1/4 inch off of it. Look up my thread, "new to me g21". I just had to drill new bolt holes
|
03-27-2021, 07:46 PM | #3 |
Getting Wild
Join Date: Jul 2020
Posts: 75
|
Re: Lowering 6" lift
Thanks for the confirmation, I cut an inch off today & it looks better, but I think it could stand another inch & be were I’d like it.
|
03-30-2021, 05:50 PM | #4 |
Getting Wild
Join Date: Jul 2020
Posts: 75
|
Re: Lowering 6" lift
I ended up cutting 2" off that lift frame, that with the HD springs seems to be just right.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Lowering a EZ GO with Factory Lift | On Road Golf Carts! | |||
Jakes 6"spindle Lift Kit vs RHOX 6"BMF A-Arm Lift Kit | Lifted Golf Carts | |||
Lowering lift question | Electric Club Car | |||
What kind of offset is my EZGO RXV w/Jakes 6" Lift Kit and 2" spacer rear and 1" back | Lifted Golf Carts | |||
Lowering a Yamaha G22, maybe a "the drive" | On Road Golf Carts! |