Is There Any Way To Go From A Gas Motor Into This Stock Axle??(pics)

taylorar70 · 12-02-2009, 05:27 PM

is it really that much just for the *** motor

mikesmotortoys · 12-02-2009, 05:29 PM

Quote:

Originally Posted by taylorar70

i do have some money but the thing is how much would that cost to do? the rear axle?

Rear axle, motor, starter, battery, fuel pump, air box assembly, choke assembly, shop time = $2,000.00 MINIMUM - and this is used parts at a DEAL. It will be cheaper to buy a used gas cart...

Just fix the motor and call it done...

gornoman · 12-02-2009, 05:33 PM

Quote:

Originally Posted by taylorar70

is it really that much just for the *** motor

Oh, come on! Your leaning on a $35,000 truck!

taylorar70 · 12-02-2009, 05:34 PM

Quote:

Originally Posted by mikesmotortoys

Rear axle, motor, starter, battery, fuel pump, air box assembly, choke assembly, shop time = $2,000.00 MINIMUM - and this is used parts at a DEAL. It will be cheaper to buy a used gas cart...

Just fix the motor and call it done...

I Can weild i have alot of hill jack friends looking for motors for me. my pops has several mechanic friends . i just am trying to get ideas on what to do and what i could use to turn that axle into a gas motor freindly axle?

taylorar70 · 12-02-2009, 05:36 PM

Quote:

Originally Posted by gornoman

Oh, come on! Your leaning on a $35,000 truck!

I Wish it was Mine its my pops he has saved and worked 60 hour weeks for more than 9 years to get that truck he wants me to learn mechanics and work on my own baby(golf cart).

DOOmsman · 12-02-2009, 06:39 PM

My 2 cents get a job at a shop work for cheap to start sweeping and watching, lifting but always watching how things work and are done. You can save up to fix your motor or buy a gas cart. Don't waste your time on a project that will drain your resources.

impalass88 · 12-02-2009, 07:33 PM

taylor, what year is your cart? I have a 36 volt series motor that was running good when it was removed to upgrade to a higher performance motor. If you are interested you can PM me and maybe we can make a deal. This would give you a direct replacement and get you up and running for a very reasonable sum.

taylorar70 · 12-02-2009, 08:23 PM

idk i have to get a good amout of power and gass is eazyer to fix no stupid computer crap just strait mechanics

impalass88 · 12-02-2009, 08:28 PM

No sweat....just thought I would throw that out there. What year is your cart? If it's older there is no computer to deal with. Really the electric carts are not that complicated. It teaches you alot about wiring and electrical. With what you are trying to do, that's difficult. You would be better off fixing the cart you have with a used motor and then sell it and buy a descent used gas cart with the money.

taylorar70 · 12-02-2009, 08:31 PM

but i am a welder thats the thing. its a 96

12-02-2009, 05:27 PM	#11
taylorar70 Not Yet Wild Join Date: May 2008 Location: Alexandria,KY Posts: 38	Re: Is There Any Way To Go From A Gas Motor Into This Stock Axle??(pics) is it really that much just for the *** motor

12-02-2009, 06:39 PM	#16
DOOmsman Gone Wild Join Date: Jul 2008 Location: Reddick IL Posts: 11,220	Re: Is There Any Way To Go From A Gas Motor Into This Stock Axle??(pics) My 2 cents get a job at a shop work for cheap to start sweeping and watching, lifting but always watching how things work and are done. You can save up to fix your motor or buy a gas cart. Don't waste your time on a project that will drain your resources.

12-02-2009, 07:33 PM	#17
impalass88 Gone Wild Join Date: Jul 2009 Location: Grand Rapids, Michigan Posts: 274	Re: Is There Any Way To Go From A Gas Motor Into This Stock Axle??(pics) taylor, what year is your cart? I have a 36 volt series motor that was running good when it was removed to upgrade to a higher performance motor. If you are interested you can PM me and maybe we can make a deal. This would give you a direct replacement and get you up and running for a very reasonable sum.

12-02-2009, 08:23 PM	#18
taylorar70 Not Yet Wild Join Date: May 2008 Location: Alexandria,KY Posts: 38	Re: Is There Any Way To Go From A Gas Motor Into This Stock Axle??(pics) idk i have to get a good amout of power and gass is eazyer to fix no stupid computer crap just strait mechanics

12-02-2009, 08:28 PM	#19
impalass88 Gone Wild Join Date: Jul 2009 Location: Grand Rapids, Michigan Posts: 274	Re: Is There Any Way To Go From A Gas Motor Into This Stock Axle??(pics) No sweat....just thought I would throw that out there. What year is your cart? If it's older there is no computer to deal with. Really the electric carts are not that complicated. It teaches you alot about wiring and electrical. With what you are trying to do, that's difficult. You would be better off fixing the cart you have with a used motor and then sell it and buy a descent used gas cart with the money.

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

12-02-2009, 08:31 PM	#20
taylorar70 Not Yet Wild Join Date: May 2008 Location: Alexandria,KY Posts: 38	Re: Is There Any Way To Go From A Gas Motor Into This Stock Axle??(pics) but i am a welder thats the thing. its a 96

Similar Threads
Thread	Forum
1978 Harley Motor swap to a CRF 450cc motor. pics inside.. gearing help???/	Gas Harley Davidson
Anyone have a stock CC motor?	Extreme DC!
94'-01.5' EZ Go Stock Front Axle	Golf Carts and Parts
Stock motor in a 93 cc	Electric Club Car
Stock Motor HP ?	Electric EZGO