Datel Voltage Meter

[vw3858]

Originally Posted by vw3858

Thanks scubabud - wasn't sure how the dilema woeked out...I think I will try one of these

Just ordered my ebay meter

[scubabud]

Originally Posted by vw3858

Just ordered my ebay meter

Uh Oh... Sorry about this but yesterday my Meter short circuited and caught fire melting my dash, wiring harness and front tires and rims...
















(just kidding... good luck with yours!)

[vw3858]

Originally Posted by scubabud

Uh Oh... Sorry about this but yesterday my Meter short circuited and caught fire melting my dash, wiring harness and front tires and rims...


(just kidding... good luck with yours!)

I bout chit my drawers!!!! then I saw the fine print

[scubabud]

Originally Posted by vw3858

I bout chit my drawers!!!! then I saw the fine print

I knew you had a good sense of humor so I figured... why not scare the Chit out of him... Did you install it yet?

[vw3858]

Originally Posted by scubabud

I knew you had a good sense of humor so I figured... why not scare the Chit out of him... Did you install it yet?

Just reveived it yesterday...I have been busy with several electrical tasks; backup lights, underbody glow lights, and some switches...hope to get to it in the next week

[encbuggy]

Originally Posted by scubabud

Forget about the problems... everything got resolved...

I still have that last one I purchased for under $20 and works fine. You can buy three for the price you're talking about when you consider faceplate and shipping and still be ahead. I would go with the one I purchased... 0-199v DC under $20 shipped and make sure you silicon the faceplate backing to prevent moisture from getting behind the dash!

scubabud

3 q's

what are the dimensions of this display? want to fit in dash where factory unit would go.

also does the display stay on constantly? i assume it would unless you switched the power circuit to the unit.

if constant on did you measure how much current it draws?

[scubabud]

Originally Posted by encbuggy

scubabud

3 q's

what are the dimensions of this display? want to fit in dash where factory unit would go.

also does the display stay on constantly? i assume it would unless you switched the power circuit to the unit.

if constant on did you measure how much current it draws?

1. 3 1/2 digit Blue LED volt meter.

Accuracy: +/- 0.5%
Type: LED (Blue)
Power supply: 6~15V
Range: 0-1.99V/ 0-199.9V
Resolution: 0.1V
Size: 72mm x 36mm x 33mm

2. Switch the 12v input to turn on and off if desired.

3. Negligible

[encbuggy]

Originally Posted by scubabud

1. 3 1/2 digit Blue LED volt meter.

Accuracy: +/- 0.5%
Type: LED (Blue)
Power supply: 6~15V
Range: 0-1.99V/ 0-199.9V
Resolution: 0.1V
Size: 72mm x 36mm x 33mm

2. Switch the 12v input to turn on and off if desired.

3. Negligible

thanks it looks like a contender