|
|
|||||||
| Electric Club Car Electric DS, and Precedent golf cars |
  |
|
|
Thread Tools | Display Modes |
07-13-2010, 11:02 PM
|
#21 |
|
Not Yet Wild
Join Date: Jul 2010
Location: Raleigh, NC
Posts: 45
|
Re: 97 cc 36v vglide conversion
10-4 on the solenoid wires
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
07-13-2010, 11:05 PM
|
#22 |
|
Happy Carting
 Join Date: Dec 2007
Location: Southern California
Posts: 73,410
|
Re: 97 cc 36v vglide conversion
The blues look like they connect to the microswitch.... open her up and see? The black and white should be the throttle position indicator wire to the controller? But I am confused about the 1 to 2 wire split on the white? can you open it up and tell us what color wires go to the micro switch inside?
|
|
|
|
|
07-13-2010, 11:10 PM
|
#23 |
|
Not Yet Wild
Join Date: Jul 2010
Location: Raleigh, NC
Posts: 45
|
Re: 97 cc 36v vglide conversion
Blue and green go to micro switch and the black and white both have splits in them with round plug connectors (female ends) the blue wire from micro has a male rpc, the green has a female spade connector. The black wire also has what looks like a diode??? or something wired inline.
|
|
|
|
|
07-13-2010, 11:16 PM
|
#24 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,410
|
Re: 97 cc 36v vglide conversion
Lets see a pic of the diode in the black wire?
Wire color diagrams are for sissies  Color wires lead to discussions about colors instead of function ..........  Without color you have to know what wire goes from where to where and why  |
|
|
|
|
07-13-2010, 11:17 PM
|
#25 |
|
Not Yet Wild
Join Date: Jul 2010
Location: Raleigh, NC
Posts: 45
|
Re: 97 cc 36v vglide conversion
Here is a better picture of those two wires.
|
|
|
|
|
07-13-2010, 11:17 PM
|
#26 |
|
Gone Wild
Join Date: Jun 2010
Location: Central Florida
Posts: 2,757
|
Re: 97 cc 36v vglide conversion
Scotty, the Black and white are split because that car was originally a 48 volt unit that used the 3rd micro on the F&R for the "half speed reverse". One of them (I think the black) will have diodes/resistors in line on it to reduce the resistance to half the "normal" resistance.
dukgetr, unless you WANT half speed reverse, clip the white and black to the point where you only have a single strand of wire and then extend them back to your controller. |
|
|
|
|
07-13-2010, 11:22 PM
|
#27 |
|
Not Yet Wild
Join Date: Jul 2010
Location: Raleigh, NC
Posts: 45
|
Re: 97 cc 36v vglide conversion
So clip the diode/resistor end off the black and remove either leg on the white?
|
|
|
|
|
07-13-2010, 11:24 PM
|
#28 |
|
Not Yet Wild
Join Date: Jul 2010
Location: Raleigh, NC
Posts: 45
|
Re: 97 cc 36v vglide conversion
10-4 got your meaning now. Definetely don't need half speed reverse.
|
|
|
|
|
07-13-2010, 11:27 PM
|
#29 | |
|
Gone Wild
Join Date: Jun 2010
Location: Central Florida
Posts: 2,757
|
Re: 97 cc 36v vglide conversion
Quote:
As a trained E-Z-GO mechanic, I still remember the first time I saw that resistor/diode through the micro for half speed reverse setup... I was scratching my head for quite a while thinking how odd that was..... It has since grown on me, but I still prefer E-Z-GO's setup....... |
|
|
|
|
|
07-13-2010, 11:31 PM
|
#30 |
|
Not Yet Wild
Join Date: Jul 2010
Location: Raleigh, NC
Posts: 45
|
Re: 97 cc 36v vglide conversion
Thanks for all the help guys. Hopefully will have time to tinker tomorrow evening and post progress.
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| vglide grinding | Electric Club Car | |||
| What is this on my solenoid 97 cc VGlide | Electric Club Car | |||
| Question converting VGlide&coils to Vglide&controller | Electric Club Car | |||
| SPEED UPDATE; 97 CC VGlide 36/48 conversion | Electric Club Car | |||
| Vglide to controller, is this right? | Electric Club Car | |||
Linear Mode
