Hello and Trans input shaft ????

sabercat · 08-09-2009, 09:33 PM

nice welding there but aren't you going to cut the head of the bolt off to get the nut on?

Flintrock · 08-09-2009, 09:34 PM

Looks just like the spring from CPP.......

dirtysouth · 08-09-2009, 09:39 PM

Quote:

Originally Posted by jmz

Should I try it or just go ahead a by a good spring. I really don`t want to spend a lot of money until I get the basics done and see if it`s going to run ok. I just noticed my primary sliding sheave is history.

P.S. thanks for all the help

That spring will work to see if the cart will run. After ya get it goin', ya need ta decide if it's shifting correctly.

rib33024 · 08-09-2009, 09:41 PM

LOOKS LIKE A NUT ON THAT BOLT not sure--JUST My 2 cent

smallblock450sl · 08-09-2009, 09:44 PM

Quote:

Originally Posted by Flintrock

Looks just like the spring from CPP.......

They may look alike, but the spring tension is completly differant.

sabercat · 08-09-2009, 09:50 PM

just for agument sake i don't think that is a BU spring, there grey/black, the white one is a dixie power spring from CPP i belive. (correct me if i'm wrong)

ps- Sorry that is a nut on the end of the welded on bolt, i didn't look closey enough. (my bad)

jmz · 08-09-2009, 10:17 PM

It has a 2" ball mounted to the front of the cart, I figured for moving trailers. I guess the big spring would help for that ????

08-09-2009, 09:33 PM	#21
sabercat gone yamaha! Join Date: Sep 2008 Location: ontario, canada Posts: 1,424	Re: Hello and Trans input shaft ???? nice welding there but aren't you going to cut the head of the bolt off to get the nut on?

08-09-2009, 09:34 PM	#22
Flintrock Raised by coyotes Join Date: Nov 2008 Location: Central Texas Posts: 5,658	Re: Hello and Trans input shaft ???? Looks just like the spring from CPP.......

08-09-2009, 09:41 PM	#24
rib33024 ...................... Join Date: Apr 2009 Location: FT Lauderdale FL. Posts: 16,416	Re: Hello and Trans input shaft ???? LOOKS LIKE A NUT ON THAT BOLT not sure--JUST My 2 cent

08-09-2009, 09:50 PM	#26
sabercat gone yamaha! Join Date: Sep 2008 Location: ontario, canada Posts: 1,424	Re: Hello and Trans input shaft ???? just for agument sake i don't think that is a BU spring, there grey/black, the white one is a dixie power spring from CPP i belive. (correct me if i'm wrong) ps- Sorry that is a nut on the end of the welded on bolt, i didn't look closey enough. (my bad)

08-09-2009, 10:17 PM	#27
jmz Gone Wild Join Date: Jul 2009 Location: Gonzales, Texas Posts: 585	Re: Hello and Trans input shaft ???? It has a 2" ball mounted to the front of the cart, I figured for moving trailers. I guess the big spring would help for that ????

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

Similar Threads
Thread	Forum
Input shaft	Electric EZGO
Input Shaft question	Electric EZGO
need input shaft for G2	Golf Carts and Parts
94 medalist input shaft	Electric EZGO
differential input shaft	Electric EZGO