|
Gas Club Car Gas DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
12-31-2010, 01:36 PM | #11 | |
What the ....?
Join Date: Jan 2007
Location: N.E. Wisconsin
Posts: 14,933
|
Re: Club car carryall Jakes lift ?
Quote:
But... Club Car doesn't think of these things when designing them... then again... ahhh... nevermind! |
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
12-31-2010, 05:12 PM | #12 |
Not Yet Wild
Join Date: Feb 2008
Location: South Ga
Posts: 12
|
Pictures added!
In the first page lockman provided it show a plate on top of the leaf spring. My cart has 3 of these stacked together.Should there be 1 or 3 of these plates? I found some information somewhere that stated the distance between the bolt holes on the spring should be 27" mine is 27" on or off the cart. This cart has low hours and has never been abused.I have owned it since new. Just noticed the wheel camber off after the lift was installed. I appreciate all of your help.
thanks Michael Last edited by elwood22165; 12-31-2010 at 05:25 PM.. Reason: pictures |
12-31-2010, 06:11 PM | #13 |
Gone Wild
Join Date: Jan 2007
Location: La Porte Indiana
Posts: 1,392
|
Re: Club car carryall Jakes lift ?
Well in that case, it is probably not your leaf spring. Did you check the condition of the king pins, bushings and sleeves when you put the lift on? What about the holes where the delta arms mount to? These can become enlongated just from normal use. If any of these are worn, the tires will tip in at the top. I am assuming that both of your tires have this lean condition?
This is the thing i don't like about a jakes lift. they are very nice products. But if there is a camber condition there is no provision to help it out.... other than checking for and replacing any worn components, there really isn't much that i know of that can help your situation. Good luck! let us know how you fare... -Aaron |
12-31-2010, 07:25 PM | #14 |
What the ....?
Join Date: Jan 2007
Location: N.E. Wisconsin
Posts: 14,933
|
Re: Club car carryall Jakes lift ?
I have 3 plates on my 07 Lynx also, the illustration from the manual is just a general idea what to look for.
Your tires aren't off as much as you made them sound, try the camber adjustment per the manual, it just may work for you! |
01-01-2011, 02:03 AM | #15 |
Gone Wild
Join Date: Jan 2007
Location: La Porte Indiana
Posts: 1,392
|
Re: Club car carryall Jakes lift ?
What is around your leaf spring bolt on your kingpin?
They put 3 plates on several models. I guess it is their way of getting an extra half inch of lift in the front of the cart. Rasy as they already have those parts on hand. I have seen several carryalls with them on there. |
01-01-2011, 10:43 AM | #16 |
What the ....?
Join Date: Jan 2007
Location: N.E. Wisconsin
Posts: 14,933
|
Re: Club car carryall Jakes lift ?
A steering stop, they (2) come with Jake's 3" spindles,
I've since ground them down a little for a slightly tighter steering radius! |
|
|
Similar Threads | ||||
Thread | Forum | |||
need help with a Jakes a-arm lift | Lifted Golf Carts | |||
3" Jakes lift with 22x9.5-10 Tires -'98 Club Car DS | Gas Yamaha | |||
Jakes lift kit let me down! | Lifted Golf Carts | |||
6" Jakes spindle lift for 84-96 Club Car | Golf Carts and Parts | |||
jakes lift | Gas Club Car |