06-28-2020, 08:48 AM | #1 |
Getting Wild
Join Date: May 2015
Posts: 102
|
2009 precedent
Morning
I have a 2009 Precedent that I was going to do the bushings on but I noticed how flat the rear leafs are ☹️ My question is do I get new single leaf springs (can’t seem to find them online) OR do I get a set of 2 leaf HD springs? Can the 2 leaf HD be turned upside down and installed on top of the axle like the single spring? What I found online were front single leafs that are 28 3/4. My leafs are currently about 30” or so but flattened out, so would the front single leafs work on the rear? Added pics for reference 👍. John |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-28-2020, 09:36 PM | #2 |
Bonafide Nincompoop
Join Date: Dec 2015
Location: Charlottesburg Va
Posts: 8,987
|
Re: 2009 precedent
They’re just flat like that on the precedent. If you need extra weight capacity (Rear seat kit or cargo bed) consider the Dual action springs that are available from many of our site sponsors.
They will still sit relatively flat but will increase the load capacity by quite a bit and still ride smooth. |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
2009 precedent | Electric Club Car | |||
2009 Precedent won't go. | Electric Club Car | |||
2009 Precedent then and now | On Road Golf Carts! | |||
2009 RXV vs. 2009 Precedent - both gas | Gas EZGO | |||
2009 gas Precedent vs. 2009 gas RXV | Gas Club Car |