![]() |
|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
![]() ![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Not Yet Wild
Join Date: Jun 2024
Posts: 1
|
![]() Good morning everyone,
I have a 2008 RXV with a Danaher controller that suddenly stopped working. I decided to unplug the brake resistor controller, the black cable that goes from B- to the brake controller, and the car magically started. So my question is: What happens if I use the car without the brake controller? By brake controller I mean the OEM part 608148. Thanks in advance. |
![]() |
![]() |
![]() |
|
![]() __________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
![]() |
Tags |
2008, brake resistor controller, danaher, rxv, stop. |
|
Thread Tools | |
Display Modes | |
|
![]() |
||||
Thread | Forum | |||
Heavy duty resistor for motor brake | Electric EZGO | |||
95 DS 48 volt Resistor or Power Resistor | Electric Club Car | |||
88 EZGO electric resistor cart resistor problem | Electric EZGO | |||
Pre-charge resistor for resistor carts? | Electric EZGO | |||
5TH speed resistor has a burned mark on resistor board and melted the wire | Electric EZGO |