09 RXV wont move!!!Please HELP!!!

[shanep]

I was attempting to hook up an LED light bar to my battery indicator harness wires and when I touched my light bar wire to the red wire on the harness it sparked. Now it will not move forward or backwards AND the battery indicator gauge shows 0 and the yellow light on the indicator is staying on. Before this happened I had just fully charged the batteries. I could not find a fuse anywhere. I do not have head lights or taillights. The only accessory I have is the battery indicator. I am praying to God I did not fry the controller. Any ideas anybody?

[cgtech]

Shoulda read up before you tried that... Odds are good that the controller is gone. Those meter wires were never intended to power anything other than the gauge.

[Volt_Ampere]

Sounds more like a blown fuse to me if the battery indicator isn't working. Look for a fuse.

[shanep]

Wanted to follow up so nobody else makes the same ignorant mistake I did. The controller is bad. Anyone have a used RXV controller for sale?

[HiTechRedNeck]

Rxv tech here...

Sorry- probably best to get a controller from EZ-Go Maybe local dealer.
Local dealer can program it for 19mph for you.

Please note that RXV's use a digital control system.

The wire harness is not "User friendly" for modifications.
To modify, you must know about moding PLC's or at least understand digital signal electronics.
Please post/ask about adding or modifying RXV wiring.

Will try to answer any questions .

[shanep]

thank you hitechredneck for your response