|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
02-02-2016, 09:53 PM | #1 |
Not Yet Wild
Join Date: Feb 2016
Posts: 3
|
2011 club car precedent problems
I have a 2011 club car precedent electric cart when driving if I floor it it will jerky and cut off then I have to let off then repress it to go. It also will jerk and cut off when coming up hill. It has new batteries and is fully charged.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-02-2016, 09:57 PM | #2 |
revolutiongolfcars.com
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 10,224
|
Re: 2011 club car precedent problems
Sounds like the classic symptoms of a failing MCOR. Very common problem. A 2011 should have been equipped with an MCOR2 from the factory. I recommend replacing it with an MCOR4. You'd need conversion kit number AM293001 to make this conversion.
|
02-02-2016, 10:03 PM | #3 |
Not Yet Wild
Join Date: Feb 2016
Posts: 3
|
Re: 2011 club car precedent problems
Ok im new to this could you tell me what that is and how much it might cost
|
02-03-2016, 09:34 AM | #4 |
revolutiongolfcars.com
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 10,224
|
Re: 2011 club car precedent problems
MCOR = Motor Controller Output Regulator. It's essentially the throttle switch. It's located beneath the floor mat, attached to the side of the accelerator pedal linkage beneath the cart. It has a potentiometer, sort of like a dimmer switch knob for a light. The more pedal you give it, the more power it tells the controller to apply to the motor. When the contacts inside the MCOR get dirty, it begins to surge as you're describing. We sell lots of them.
|
02-03-2016, 09:51 AM | #5 | |
Gone Wild
Join Date: Mar 2014
Location: Georgia
Posts: 187
|
Re: 2011 club car precedent problems
Quote:
What a difference it made to my 2009 President, runs the best since I have had the cart |
|
02-03-2016, 10:08 AM | #6 |
revolutiongolfcars.com
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 10,224
|
Re: 2011 club car precedent problems
|
02-16-2016, 10:46 AM | #7 |
Not Yet Wild
Join Date: Feb 2016
Posts: 3
|
Re: 2011 club car precedent problems
Will a MCOR 4 Gen 2 work on a 2011 club car
|
02-16-2016, 01:10 PM | #8 |
Not Yet Wild
Join Date: Jan 2010
Location: Middle Georgia
Posts: 41
|
Re: 2011 club car precedent problems
Check out the link.
http://www.buggiesgonewild.com/elect...explained.html It's in the "Stickys" above. There's a lot of good information along with P/Ns. There are even pictures to help you. |
02-16-2016, 08:46 PM | #9 |
Gone Wild
Join Date: Oct 2014
Location: Northeast Georgia
Posts: 178
|
Re: 2011 club car precedent problems
I have a 2011 Precedent with Gen 2 pedal assembly and ordered the MCOR2 to MCOR4 conversion kit from David at Revolution Golf Cars and the install was very easy and made a big difference, cart runs great now. Took maybe 10 minutes to install, David send directions with the conversion kit on how to do it
|
Tags |
club car 2011 |
|
|
Similar Threads | ||||
Thread | Forum | |||
2011 club car precedent 48v | Golf Carts and Parts | |||
2011 club car precedent gas add led lights | Gas Club Car | |||
2011 club car precedent gas backfiring | Gas Club Car | |||
Steering Rack for 2011 Club car precedent | Golf Carts and Parts | |||
2011 club car precedent speed code 4 ??? | Electric Club Car |