|
02-24-2016, 10:57 AM
|
#1 |
|
Gone Wild
 Join Date: Mar 2015
Location: central florida
Posts: 368
|
F&R switch
can the f&r switch work sometimes then just stop all of a sudden?
or can the controller just stop and go. its a 94 club car ds with a alltrax controller that says Nivel 482 |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
02-24-2016, 11:27 AM
|
#2 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,406
|
Re: F&R switch
Controllers do not typically stop and go... it can happen, a loose connection in circuit board or corroded pin in terminal. The control has an LED which will flash a fault code if it sees a problem...
The F&R or any one of the 13 high cables or any of their 26 connections can fail as you describe.... often if the F&R is to blame you can wiggle it and make connection. |
|
|
|
 |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| forward/reverse switch change to toggle switch | Electric Club Car | |||
| Pull switch/foot switch voltage | Electric Club Car | |||
| 2009 Precedent run/tow toggle switch replaced with keyed switch | Electric Club Car | |||
| Just got a G9 need to know how to wire ignition switch to push pull switch ASAP! | Gas Yamaha | |||
Linear Mode
