|
07-20-2018, 04:14 PM
|
#1 |
|
Not Yet Wild
Join Date: Jul 2018
Posts: 15
|
I got my 36 volt solenoid to click but still no go.....
My melex cart get 37.5 volts between the 2 small studs on solenoid but when accelerator is applied it drops to zero anyone know of any test I can do to figure this out? Solenoid didn’t click before I put new micro switch for foward or reverse. Any help would be greatly appreciated thanks
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| 48 volt TXT 2011 does nothing, no solenoid click | Electric EZGO | |||
| 98 club car 48 volt won't move no click at solenoid | Electric Club Car | |||
| PDS 36 Volt no movement or solenoid click | Electric EZGO | |||
| DCS 36 Volt no Solenoid click | Electric EZGO | |||
| 36 volt DS was running. Now no Solenoid click | Electric Club Car | |||
Threaded Mode