Cheapest place for 295cc engine parts

[steveclv]

Where's the cheapest online place for 295cc parts such as head/exhaust gaskets and valves?

I've found exhaust valves from $20 to $42 each and as I'm on a strict budget I'd like to find the cheapest supplier.

Thanks

[technician#2]

Are you sure you need to replace the valves, or do they just need to be adjusted?

[steveclv]

Definitely burnt out - not sure I can get away with a regrind or not. Interestingly I found an ebay seller who was selling 9 cylinder heads - every one of them had bad valves so it sounds as though they are a weak point on the Robin.

[ruredy]

Yep, the valves are not hardend steel and wear quickly however the replacement valves are and should last.

[steveclv]

Great - thanks

Are the heads normally salvageable with just a regrind or do they need to have new inserts installed? I see there are also 2 different types of valve retainers - can we replace the old with the new if we get the new retainers etc?

[Radicalgolfcarts]

Did you check out my site www.radicalgolfcarts.com? From what I have seen on the net we have been the cheapest on OEM E-Z-GO parts. If something isn't on my site that you need give me a call tomorrow @989-697-3080, or pm me any questions that you have.

Thanks,

Eric Shark
Radicalgolfcarts.com
989-697-3080
989-980-8096 cell

[steveclv]

Thanks - I'll go take a look and see if you have what I need. Head comes off at the weekend.

[ruredy]

Originally Posted by steveclv

Great - thanks

Are the heads normally salvageable with just a regrind or do they need to have new inserts installed? I see there are also 2 different types of valve retainers - can we replace the old with the new if we get the new retainers etc?

You'll have to change the retainers to the new style if you get replacement valves and have the old style.