|
05-24-2023, 07:36 PM
|
#1 |
|
Getting Wild
Join Date: Jan 2009
Posts: 116
|
Ezgo pds with alltrax xct 48500
Just swapped an ezgo pds cart over to 48v and running an alltrax xct 48500 controller. The cart runs good but just doesn’t seem to have the acceleration you would think with a 500 amp controller. From a dead stop it will set you back good but seems like the acceleration falls off. The cart will get to about 28-29 mph with 20” tires. I played around with the programming software a little but didnt see any real difference.
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
 |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| 1998 EZGO TXT Alltrax 48500 install problem | Electric EZGO | |||
| Alltrax SR-48500 - 96 EZGO TXT | Electric EZGO | |||
| Mounting a Alltrax 48500 in a EZGO | Electric EZGO | |||
| Ezgo series Alltrax SPM 48500 question/problem | Electric EZGO | |||
| Mounting Alltrax SPM-48500 to 2001.5+ ezgo series txt | Electric EZGO | |||
Linear Mode
