|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
04-29-2015, 01:55 PM | #1 |
Gone Wild
Join Date: Nov 2013
Location: mich
Posts: 671
|
Got the s/metal screws out.wha...
What to i do? to get he black dash center panel out , Does the complete aluminum surround ring have to come of the dash?Or does it pop off the Flatblade screw driver? .....(taking small inst; lite out to check it for its problem) and,thank you for taking the time to read this. bob s
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-29-2015, 01:56 PM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,418
|
Re: Got the s/metal screws out.wha...
The aluminum trim piece does not have to come off. Remove a screw from each side (in glove boxes) and pop the dash out being careful not to ground out the key switch terminals on the frame when you do it.
|
04-29-2015, 03:14 PM | #3 | |
Gone Wild
Join Date: Nov 2013
Location: mich
Posts: 671
|
Re: Got the s/metal screws out.wha...
Quote:
I am saying .it isn't just popping off for me. its a tight fit .as it appears, Can i lift it off from the bottom?.just the center plastic piece. How much of the dash..pops out? just the small center section holding the lite and the key? |
|
04-29-2015, 03:31 PM | #4 |
Gone Wild
Join Date: Apr 2014
Location: Oregon City, Or
Posts: 1,977
|
Re: Got the s/metal screws out.wha...
After the 2 screws are out, insert (about 1/2") a small flat blade screwdriver in one corner between the panel and metal trim. Then drag the screwdriver like a zipper. It is tight but the top of the panel will pop out.
. |
04-29-2015, 03:41 PM | #5 |
Gone Wild
Join Date: Nov 2013
Location: mich
Posts: 671
|
Re: Got the s/metal screws out.wha...
thank you Tag 50- much appreciated my friend bob s
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Seat back Screws | Gas Club Car | |||
Crank case screws | Gas Yamaha | |||
Questions on Carb Screws | Gas EZGO | |||
Rusty Screws - What did they look like new? | Electric EZGO | |||
Are these the right screws? | Electric Club Car |