CC-ds 2002 axels spin quietly and no play or tight spots in them

[bsa_bob]

Originally Posted by theboss20

Bob...a couple of old guy tips from one old guy to another...the motor is heavy enough to be dangerous if you are laying under the cart trying to take it out and it's awkward...what I did was tied a ratchet load tie-down belt around it and tightened the ratchet until it was tight...then I took the other end and tied it to a two by four and laid that across the opening where the batteries are with the seat removed. This allowed me to use the upper two-by-four as a way of controlling the motor coming out and going back in without dropping the motor on the floor or on my head. I am sure there are other ways but this worked for me...

"The boss" hey thank you for the reply. Got what your saying bob s

[TahoeDawgZ71]

I don't have a book with a motor centering kit in it. Sorry. It's not original equipment so it's not in the book.

[bsa_bob]

thanks David not havin good luck with this cart. not having any luck!! i should say bob s

[bsa_bob]

btt btt I have another opinion from mechanic. He says my clunk is not the problem.over the phone.The spring would be making noise and its not. doing this? So whats next to look at?? bob s