|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
07-25-2012, 06:21 PM
|
#1 |
|
Not Yet Wild
Join Date: Jun 2012
Location: Kings Mountain NC
Posts: 28
|
EZGO controller help
Just bought a used 1999 EZGO and it is my second 99 model my first had the tow-run switch at the controller and this does not so I assume it is a series cart, the question is when I took the cover off there were two wires coming off the coil that had plugs on about a foot of wire that were not plugged into anything just wrapped up and also the controller is a EZGO but on the base it has 400 written in majic marker on the base. The cart runs but is going to have to have batteries, is it possible it has been rebuilt from stock, because I have 4 gauge wires and fixing to take my motor to Rick at Plum Quick.
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
07-25-2012, 11:11 PM
|
#2 |
|
......................
 Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
Re: EZGO controller help
Yeah Plum Quick will fix you up with a motor, i think it's a rebuilt controller
|
|
|
|
|
07-26-2012, 04:41 PM
|
#3 |
|
Not Yet Wild
Join Date: Jun 2012
Location: Kings Mountain NC
Posts: 28
|
Re: EZGO controller help
Talked to PQ today and they said that it was possible that the controller had been sent off and rebuilt to 400 amps
|
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| looking for ezgo solid state controller for 90 ezgo | Electric EZGO | |||
| I need a 36 v controller for 94 EZGO | Electric EZGO | |||
| I need a 36 v controller for 94 EZGO | Golf Carts and Parts | |||
| Did lift kit cause controller to die? What are controller options? 95 EZGO 25864G05 | Electric EZGO | |||
| Where 2 get EZGO DCS controller? | Electric EZGO | |||
Linear Mode
