|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
09-03-2012, 06:25 PM | #1 |
Getting Wild
Join Date: Jul 2012
Posts: 78
|
Question about txt keyswitch faceplate mounting
On my build, the part of the dash at the bottom of the keyswitch plate where it rivets to is broken off. I have a new faceplate, but nothing to attach the faceplate to in the 2 holes at the bottom. Anyone have any ideas on how to fix this?
Thanks. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-03-2012, 07:35 PM | #2 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 12,997
|
Re: Question about txt keyswitch faceplate mounting
you could try making some little tabs that are attached to bolts through the plate. When you spin them they would wedge behind the dash. Kind of like a quarter turn lock..
|
09-03-2012, 08:17 PM | #3 |
Getting Wild
Join Date: Mar 2012
Location: TX
Posts: 117
|
Re: Question about txt keyswitch faceplate mounting
Mine has two black screws there.
|
09-03-2012, 08:19 PM | #4 |
Getting Wild
Join Date: Jul 2012
Posts: 78
|
Re: Question about txt keyswitch faceplate mounting
Yes, but there is nothing left on mine to screw in to. The lower plastic support that you screw into is not there.
|
09-03-2012, 08:31 PM | #5 |
Getting Wild
Join Date: Mar 2012
Location: TX
Posts: 117
|
Re: Question about txt keyswitch faceplate mounting
|
09-04-2012, 09:10 AM | #6 |
Getting Wild
Join Date: Jul 2012
Posts: 78
|
Re: Question about txt keyswitch faceplate mounting
I was thinking of installing a "spreader" piece of something behind it, so I would have something to screw into.
|
09-04-2012, 09:44 AM | #7 |
EZ come EZ go
Join Date: Apr 2012
Location: Parkland FL
Posts: 1,412
|
Re: Question about txt keyswitch faceplate mounting
VELCRO!!
|
09-04-2012, 09:47 AM | #8 |
......................
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
Re: Question about txt keyswitch faceplate mounting
|
09-04-2012, 10:27 AM | #9 |
Getting Wild
Join Date: Mar 2012
Location: TX
Posts: 117
|
Re: Question about txt keyswitch faceplate mounting
You could alway get a carbon fiber dash overlay, and you would have new holes. It would also look really cool!
http://www.ebay.com/itm/CUSTOM-DASH-...item231f564ff7 |
09-04-2012, 01:24 PM | #10 |
Getting Wild
Join Date: Jul 2012
Posts: 78
|
Re: Question about txt keyswitch faceplate mounting
Good thinking! I bought a carbon fiber overlay, but the switchplate has to be mounted already to the cart. The overlay just has a window hole to see the switch plate, but no where to screw it on.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Keyswitch control of 12V converter on DCS | Electric EZGO | |||
Rear Seat Mounting Question | Gas EZGO | |||
pb-6 Mounting Question | Electric EZGO | |||
Cart works with keyswitch on or off | Electric Club Car | |||
Club Car will not start...keyswitch? | Gas Club Car |