09-28-2014, 09:58 AM | #11 |
Old Sky Soldier
Join Date: Dec 2011
Location: Kentucky
Posts: 3,881
|
Re: Newbie question
Speed magnet does work. If you have the black color motor it is very easy.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-28-2014, 02:04 PM | #12 |
Gone Wild
Join Date: Dec 2013
Location: Montreal Qc
Posts: 682
|
Re: Newbie question
Ok thank,, i'm all mixed up now,, because when i park it on a flat ground and push it,, it does not beeping,, but when i park it on the top of a small hill and push it, i mean when it roll faster and for a longer distance it's starting beeping can you help me with that. ??
|
09-28-2014, 04:09 PM | #13 |
Old Sky Soldier
Join Date: Dec 2011
Location: Kentucky
Posts: 3,881
|
Re: Newbie question
From what you say the speed sensor is working. Check your motor. Is it black or gray? The magnet is very easy to install on the black motor.
You could also take the cart to a dealer and they can set the speed code to code 3 which will get you about 15 mph. You can also have your dealer order speed code 4 for you from club car. That will cost about 100-150. Gets you 19.6 mph. You can install the speedy link site sponsor, will get you a little over 20 mph. You just have to chose what you want to do. |
09-28-2014, 06:24 PM | #14 |
Gone Wild
Join Date: Dec 2013
Location: Montreal Qc
Posts: 682
|
Re: Newbie question
Ok good to know,, my motor is black,, so i think i will go with a speed magnet, because the nearest CC dealer is about 2 hours away from me.. Thank for your help..
|
09-28-2014, 06:32 PM | #15 |
Old Sky Soldier
Join Date: Dec 2011
Location: Kentucky
Posts: 3,881
|
Re: Newbie question
Come back and post how things go. Others can learn from your results.
|
09-29-2014, 06:39 AM | #16 |
Gone Wild
Join Date: Dec 2013
Location: Montreal Qc
Posts: 682
|
Re: Newbie question
|
09-29-2014, 07:12 AM | #17 |
Gone Wild
Join Date: Dec 2013
Location: Montreal Qc
Posts: 682
|
Re: Newbie question
Hey one more question.. I have the black motor. So is it the GE or the adc... Because magnet are not the same??
|
09-29-2014, 08:35 AM | #18 |
Old Sky Soldier
Join Date: Dec 2011
Location: Kentucky
Posts: 3,881
|
Re: Newbie question
Black motor is adc, you will only need to remove the two screws that hold the speed sensor on to get to the magnet. I think you have to turn the magnet to the correct side.
|
09-29-2014, 08:46 AM | #19 |
Gone Wild
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
|
Re: Newbie question
The magnet for the ADC motor does not have any particular orientation as the magnetic material is on the "Wheel" face.
The ADC motor speed sensor looks like a "Top Hat" held in place by 2 screws. Check your prices, you can get them from phoenixamerica dot com for about $20 shipped, part # P16C25R4 Also from your explanation, either the existing magnet is all broken inside the sensor or the sensor is bad. The speed of the cart should not affect the ability of the 'Walk Away" brake to engage. |
09-29-2014, 09:07 AM | #20 |
Gone Wild
Join Date: Dec 2013
Location: Montreal Qc
Posts: 682
|
Re: Newbie question
Ok thank guy i will order this magnet from phoenix america later today,, i'll keep you update with my future endeavor.....
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Newbie Question | Electric Club Car | |||
Newbie question | Electric Club Car | |||
Newbie here. Oil question? | Gas EZGO | |||
Newbie question | Electric Club Car | |||
another newbie question | Electric Club Car |