ICONLive not connecting

[Emito]

Hi everyone,
I have two LVTONG electric buggies (2022-2024 models) and recently bought a programming cable for them. I'm having two different issues:

On one buggy, when trying to connect, I get a "TFW-P0301_VarTable read error" every time, even after restarting the buggy, reinstalling COM drivers, and reinstalling iCONLive.
(screenshots of ICONLive and a little description of each error: https://imgur.com/a/LGPhvWx)


On the other buggy, it shows as connected, but when I go to the "TUNING" section, everything is empty—no red flashing, no green connected state.
(screenshots of ICONLive and a little description of each error: https://imgur.com/a/NnKPJcS)


Has anyone experienced this before or have any ideas? Appreciate any help!


I have the same problem as this guy (https://www.buggiesgonewild.com/showthread.php?t=194436)

[ca3sar]

ive noticed no one here or the FB pages help with this scenario. Im stuck with my NEOS programming also. They want to sell you cables then no one helps.

[bcre3306]

Originally Posted by Emito

Hi everyone,
I have two LVTONG electric buggies (2022-2024 models) and recently bought a programming cable for them. I'm having two different issues:

On one buggy, when trying to connect, I get a "TFW-P0301_VarTable read error" every time, even after restarting the buggy, reinstalling COM drivers, and reinstalling iCONLive.
(screenshots of ICONLive and a little description of each error: https://imgur.com/a/LGPhvWx)


On the other buggy, it shows as connected, but when I go to the "TUNING" section, everything is empty—no red flashing, no green connected state.
(screenshots of ICONLive and a little description of each error: https://imgur.com/a/NnKPJcS)


Has anyone experienced this before or have any ideas? Appreciate any help!


I have the same problem as this guy (https://www.buggiesgonewild.com/showthread.php?t=194436)

The first issue you need to download the files from the software download thread. The other I'm not sure but I would check to make sure the port settings are correct.

[EcoChandler]

Originally Posted by Emito

Hi everyone,
I have two LVTONG electric buggies (2022-2024 models) and recently bought a programming cable for them. I'm having two different issues:

On one buggy, when trying to connect, I get a "TFW-P0301_VarTable read error" every time, even after restarting the buggy, reinstalling COM drivers, and reinstalling iCONLive.
(screenshots of ICONLive and a little description of each error: https://imgur.com/a/LGPhvWx)


On the other buggy, it shows as connected, but when I go to the "TUNING" section, everything is empty—no red flashing, no green connected state.
(screenshots of ICONLive and a little description of each error: https://imgur.com/a/NnKPJcS)


Has anyone experienced this before or have any ideas? Appreciate any help!


I have the same problem as this guy (https://www.buggiesgonewild.com/showthread.php?t=194436)

What are you trying to accomplish? If they have Eco Battery's you can use Eco's tech tool for tuning and programming.