Weird issue on TXT

[jon.smith76063]

Originally Posted by kgsc

Check voltage at the run/tow switch. If it has voltage on both sides you fried a wire somewhere. I haven’t worked on the 48txt much so don’t remember if it has a fuse anywhere. I have attached a diagram

Thanks for the reply. Mine is a 36 volt cart though. I just went through the repair flow chart that I found on the forum and I don't have any voltage on pin 3 of the J3. It says that I need to replace the controller. FML. If that's the case whats a good upgrade?

[kgsc]

If it is 36 volt it is not a 2012.. Okay round 2. Might have cooked a reed switch. Check for voltage at pin 4 and 5 of J1.

[jon.smith76063]

I don't know where I came up with 12. It's an 03. The REED switch had been bypassed when I purchased it.

Pin 4 and 5 both have full bank voltage.

[kgsc]

If those two have power and the run tow doesn’t I’m guessing bad controller.