Broken Leaf Spring and a few upgrades.

[pachanga90]

The only problem with lubing them,is they will set up again.Pop them apart,you don't need to remove the springs to do it.Take the bolts and wire-wheel or sand them,then lube with caliper-lube.They will stay free a lot longer.

[MIKESTREK]

Originally Posted by pachanga90

The only problem with lubing them,is they will set up again.Pop them apart,you don't need to remove the springs to do it.Take the bolts and wire-wheel or sand them,then lube with caliper-lube.They will stay free a lot longer.

Good call. I'll definitely keep that in mind

[MIKESTREK]

out with some more old parts and plenty of rust. I thought I might need a new MCOR but once I replaced all this stuff everything runs smooth now. I replaced all those old rusty nuts and bolts too

[MIKESTREK]

This week I replaced all the tires and I decided to keep the cart pretty much all stock with the stock 8" tires. I've decided I'm not going to lift it.