What bushings for what part

[Gnaitbait]

I wound up ordering a front bushings kit from David Hicks awhile back and am just getting on the installation today. The kit is for my club car 2004 ds 48 volt dc. As pretty much always I seem to run into problems on the weekend when others are off work lol. Since the kit does not come with an explanation as to what bushings go where I am at a loss here. I know the blue shorter bushings go on the delta A plate. But I also have some harder black bushings which the shorter ones are harder poly I assume and is not shiny where as the longer black bushings almost shine like polished shoes and seems to be exceptionally hard. The shorter black bushings are smaller Id and must be drilled out to except the sleeve. Any imput would surely be appreciated. Thanks in advance.

[jakesnake27]

Were you able to get them all replaced? Typically when replacing bushings, match them up using the old ones for size reference. New bushings are usually tighter (as they should be) and require a little persuasion to install.