|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
09-01-2020, 05:54 AM | #1 |
Not Yet Wild
Join Date: Oct 2019
Posts: 7
|
MZJ-400A Solenoid install issues
does anyone know if this solenoid needs a resistor and a diode? See attached picture. For 2003 DS Model
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-01-2020, 09:22 AM | #2 |
Gone Wild
Join Date: Nov 2018
Location: Florida
Posts: 370
|
Re: MZJ-400A Solenoid install issues
Depends on the cart you have. A resistor cart wont need either but a controller cart will. If you have a resistor and diode on your solenoid now you need to add them to that as well.
|
09-01-2020, 11:06 AM | #3 | |
Gone Wild
Join Date: Apr 2020
Location: 1000 Oaks, SOCAL
Posts: 424
|
Re: MZJ-400A Solenoid install issues
Quote:
My 2003 sepex IQ cart with stock Curtis controller had just a resistor on the OEM solenoid, although some think it should have had a diode, too. After changing to an IQ Alltrax controller the new controller requires two diodes. A series Alltrax controller requires a diode and resistor. |
|
09-01-2020, 01:04 PM | #4 |
Not Yet Wild
Join Date: Oct 2019
Posts: 7
|
Re: MZJ-400A Solenoid install issues
I just added a new curtis sepex 450 controller.
|
01-09-2021, 06:49 PM | #5 |
Gone Wild
Join Date: Jan 2011
Location: South Central Florida
Posts: 211
|
Re: MZJ-400A Solenoid install issues
I see this thread just stopped moving forward and is from September - But for what its worth I just installed this same solenoid on my 92 DS series cart with an solid state conversion using an alltrax controller and I had to use a diode and resistor for the install.
|
08-26-2022, 10:30 AM | #6 | |
Not Yet Wild
Join Date: Aug 2022
Posts: 3
|
Re: MZJ-400A Solenoid install issues
Quote:
|
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Mock Install: Alltrax SR48500 Controller, 400a Solenoid, SW202 Reversing Contactor | Electric EZGO | |||
EZGO PDS - New ALLTRAX XCT48500 and 400a solenoid install. no light - newbie | Electric EZGO | |||
ScottyB Alltrax 500,wires,400A &202 install | Electric EZGO | |||
Precedent XCT500, MZJ400A Install - Solenoid activation issues | Electric Club Car | |||
Alltrax Controller and 400a Solenoid Install Help | Electric Club Car |