12-05-2015, 07:35 AM | #1 |
Not Yet Wild
Join Date: Dec 2015
Posts: 3
|
"DF" Starter wires
I am putting a new engine3 in my Marathon, and I have 2 wires coming out of my starter marked DF, I'm not sure where they go 1 goes to the Voltage Regulator but the other I'm not sure
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
12-05-2015, 07:49 AM | #2 |
Not Yet Wild
Join Date: Jan 2014
Location: lake geneva wi area
Posts: 52
|
Re: "DF" Starter wires
hope this helps
|
12-05-2015, 09:31 AM | #3 |
Not Yet Wild
Join Date: Dec 2015
Posts: 3
|
Re: "DF" Starter wires
I'm working on a 94 4 stroke, not sure if it's the same but I will look. I can't figure where that other wire from the DF goes to, it may go back on one of the other starter terminals???
|
12-05-2015, 11:19 AM | #4 |
Gone Wild
Join Date: Apr 2011
Location: Washington State
Posts: 385
|
Re: "DF" Starter wires
this should show what your connections are, the center file ,page 2.
http://www.buggiesgonewild.com/ezgo-...chematics.html |
12-05-2015, 05:11 PM | #5 |
Not Yet Wild
Join Date: Dec 2015
Posts: 3
|
Re: "DF" Starter wires
Thanks
|
|
|
Similar Threads | ||||
Thread | Forum | |||
2001 DS "bucks" or "jerks" at low speed... | Electric Club Car | |||
starter ok, but still just "clicks" | Gas Columbia ParCar | |||
Golf cart "starter" issue... | Gas Club Car | |||
Club Car belt/clutch won't "change", as stuck in "low" gear | Gas Club Car | |||
Why "Carbon Fiber" "Wood grain" and Diamond Plated? | Gas EZGO |