|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
06-08-2015, 08:35 AM | #1 |
Getting Wild
Join Date: May 2013
Location: Northeast Michigan
Posts: 141
|
Yamaha G9 test run with HF 420cc and need help.
When you go to the link be sure to read the comment there. I explain my issues and would appreciate any help. Thanks! https://www.youtube.com/watch?v=IRRw...ature=youtu.be
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-08-2015, 08:53 AM | #2 |
Gone Wild
Join Date: Oct 2010
Location: Pittsburgh Pa
Posts: 1,551
|
Re: Yamaha G9 test run with HF 420cc and need help.
It's kind of hard to here you but your clutches aren't shifting all the way. By the looks of it you are using the white power spring in your secondary? Get rid of it. It's a complete piece of $hit!
I was using that spring at one time with my clone and it would only do 20mph. And that was with the governor removed. I put the stock spring back in and it would easily do 35. |
06-08-2015, 08:56 AM | #3 |
Getting Wild
Join Date: May 2013
Location: Northeast Michigan
Posts: 141
|
Re: Yamaha G9 test run with HF 420cc and need help.
Mine does 29 and the speed is not my issue. It didnt ride all the way down because i didnt have it floored. I was showing the idle to mid range how it doesnt run as smooth as expected. My old spring sits at 95mm....to short.
|
06-08-2015, 08:58 AM | #4 |
Gone Wild
Join Date: Oct 2010
Location: Pittsburgh Pa
Posts: 1,551
|
Re: Yamaha G9 test run with HF 420cc and need help.
You probably need to richen up the carb. Your exhaust and intake look to be flowing well. Now it's time to add a little more fuel.
|
06-08-2015, 09:07 AM | #5 |
Getting Wild
Join Date: May 2013
Location: Northeast Michigan
Posts: 141
|
Re: Yamaha G9 test run with HF 420cc and need help.
When i losen the idle air mixture screw it gives more gas and backfires more. I will try it again but this is what has happened.
|
06-08-2015, 07:25 PM | #6 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Yamaha G9 test run with HF 420cc and need help.
Typically, a backfire on the intake side (not out the muffler) is usually caused by a fuel-lean condition, or a ignition problem.
|
06-08-2015, 07:39 PM | #7 |
Gone Wild
Join Date: Oct 2010
Location: Pittsburgh Pa
Posts: 1,551
|
Re: Yamaha G9 test run with HF 420cc and need help.
I would reset the valve lash. Make sure the choke is functioning properly. Are you still using the stock carb? Is there any work done to the motor or is it completely stock other the intake and exhaust.
|
06-08-2015, 07:49 PM | #8 |
Gone Wild
Join Date: Oct 2012
Posts: 1,733
|
Re: Yamaha G9 test run with HF 420cc and need help.
Saw that motor at harbor freight yesterday. On sale for 299$ what a deal
|
06-08-2015, 07:55 PM | #9 |
Gone Wild
Join Date: Oct 2010
Posts: 6,730
|
Re: Yamaha G9 test run with HF 420cc and need help.
Check for an air leak between the carb and the motor.
|
06-09-2015, 09:02 AM | #10 |
Getting Wild
Join Date: May 2013
Location: Northeast Michigan
Posts: 141
|
Re: Yamaha G9 test run with HF 420cc and need help.
I purchased a tuned carb and replaced the original. I will check the valve lash. Everything else on the engine is stock. I dont want to start replacing valves, advanced keys or anything. It runs out of the box, so with a tuned carb because of the change in intake and exhaust was a must. So i was told.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
93 Yamaha G9/HF Honda Clone 420cc/rebuild almost done! | Gas Yamaha | |||
HF 420cc???? | Big Block Talk! | |||
Predator 420cc question | Clone Engine Swaps | |||
420cc predator 93 marathon | Clone Engine Swaps | |||
Yamaha G9 Lifted with 420cc predator swap | Videos |