|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
07-29-2016, 09:25 PM
|
#1 |
|
Not Yet Wild
Join Date: Jul 2016
Posts: 67
|
Can someone show me the proper routing of throttle cable?
New member with an old G2 cart, J38 serial number so I think it is a 1985.
It runs pretty decent...but the previous owner trashed the original muffler and installed a straight pipe. Needless to say, my wife/kids/neighbors don't like it. So, I replaced it with a lawnmower muffler for the time being. I'll put a factory or plowman's on it eventually. However, while I was messing with it, my throttle cable somehow came loose and ended up getting caught between the belt and clutch, which put a bind in it, and now my cable sticks.  So, I need a new cable...and I need to know the proper way to route it. Does anyone have a diagram that shows this? Thanks in advance, Shawn |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
07-29-2016, 11:45 PM
|
#2 |
|
Not Yet Wild
Join Date: Jul 2016
Posts: 67
|
Disregard...
Sounds like I can do away with the short cable, remove the long cable from the governor and connect it straight to the carb |
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| 2002 DS IQ cable upgrade/routing | Electric Club Car | |||
| Throttle wire routing | Electric EZGO | |||
| routing the throttle cable from govenor to carb? | Gas EZGO | |||
| Shifter Cable Routing After 6" Lift? | Lifted Golf Carts | |||
| battery cable routing | Electric Club Car | |||
Linear Mode
