|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
01-18-2013, 07:31 AM | #1 |
Not Yet Wild
Join Date: Nov 2012
Posts: 7
|
98 ezgo workhorse hub question??
Dose anyone know if i can replace the front hub bearings with sealed bearings instead of using bearing and races?? Im going to be using this alot in the mud and water. any input would be great thanks guys
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-18-2013, 12:18 PM | #2 |
Getting Wild
Join Date: Aug 2012
Location: minnesota
Posts: 103
|
Re: 98 ezgo workhorse hub question??
As long as the seal is good and the cap secure you shouldnt have a problem. Just make sure the sealing areas are clean smooth and free from damage. These have the same type of seals as many boat trailers and they usually see tougher service.
|
01-19-2013, 09:33 AM | #3 |
Gone Wild
Join Date: Apr 2012
Location: Dansville, NY
Posts: 396
|
Re: 98 ezgo workhorse hub question??
Sealed bearings would require spacers and would not take lateral load as well as tapered rollers will. As Sonnyhooper stated, good seals and caps = no problems.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
07 MPT1000E (workhorse) question | Electric EZGO | |||
01 Workhorse question | Gas EZGO | |||
Question for you workhorse guys??? | Gas EZGO | |||
98 workhorse question #3 and 4 | Gas EZGO | |||
workhorse question | Gas EZGO |