|
|
|||||||
| Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
06-16-2013, 01:58 PM
|
#1 |
|
Not Yet Wild
Join Date: Jun 2013
Posts: 3
|
1988 gas 244cc 2pg gen bracket removal
How do i get the 2 bottom bolts all the way out holding my gen bracket to motor, the bolts are real long and when i try removing them they butt up against the pulley and will not come out. Is there a easy way??
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
06-16-2013, 03:34 PM
|
#2 |
|
Gone Wild
Join Date: Sep 2012
Location: bikini state
Posts: 2,715
|
Re: 1988 gas 244cc 2pg gen bracket removal
try jacking the body of the cart up,giving you more room..this is how they remove the bolt from the drive clutch also..hope this helps
|
|
|
|
|
06-18-2013, 10:57 PM
|
#3 |
|
Not Yet Wild
Join Date: Jun 2013
Posts: 3
|
Re: 1988 gas 244cc 2pg gen bracket removal
Your saying just jack up the back body only, not frame, but they are still hanging in there???. It seems odd that those bolts are so long it will not clear the clutch pulley though. If these brackets break so often that they need welding,there must be other folks who tried removing them perhaps by different methods?? advise Thanks
|
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| 1988 244cc 2PG Starting Issue | Gas EZGO | |||
| 1988 marathon 244cc robin 2pg engine | Gas EZGO | |||
| ezgo 1988 244cc robins | Gas EZGO | |||
| 1988 EZGO 2 cycle gas cable bracket | Gas EZGO | |||
| Pedal bracket pin removal | Electric EZGO | |||
Linear Mode
