|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
02-26-2016, 10:13 AM | #11 |
Gone Wild
Join Date: Oct 2010
Location: Fort Worth, TX
Posts: 215
|
Re: 1998 g16 secondary driven clutch noise
What do you think. Spacer and ramp shoes? Anything else?
Thank you! |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-26-2016, 10:16 AM | #12 |
Gone Wild
Join Date: Oct 2010
Location: Fort Worth, TX
Posts: 215
|
Re: 1998 g16 secondary driven clutch noise
Sheave picture inner bushing looks ok
|
02-26-2016, 10:34 AM | #13 |
VC 460 CLONE GONE WILD
Join Date: Oct 2014
Location: Ray BY The Bay NJ
Posts: 10,639
|
Re: 1998 g16 secondary driven clutch noise
I put a new spider with ramp shoes in, but my sheave ramps were ok.It looks to me that your sheave ramps are heavily damaged.Again I am no transaxle expert but is the transaxle housing fractured around the input shaft?
|
02-26-2016, 10:52 AM | #14 |
Gone Wild
Join Date: Oct 2010
Location: Fort Worth, TX
Posts: 215
|
Re: 1998 g16 secondary driven clutch noise
Other than the scrapes you see in the picture the transaxle appears to be fine.
|
02-26-2016, 10:54 AM | #15 |
Gone Wild
Join Date: Oct 2010
Location: Fort Worth, TX
Posts: 215
|
Re: 1998 g16 secondary driven clutch noise
New spider and spacer purchased. Do the spacer teeth face the transaxle or the clutches?
|
02-26-2016, 11:43 AM | #16 |
Gone Wild
Join Date: Oct 2010
Location: Fort Worth, TX
Posts: 215
|
Re: 1998 g16 secondary driven clutch noise
Looks like the teeth face away from the transaxle
|
02-26-2016, 11:52 AM | #17 |
Gone Wild
Join Date: Oct 2010
Location: Fort Worth, TX
Posts: 215
|
Re: 1998 g16 secondary driven clutch noise
All noises are gone smooth operation of clutches in neutral. Now to tighten the belt and see how it does on some hills.
Thanks for the help! |
02-26-2016, 02:26 PM | #18 |
maintaining a low profile
Join Date: Oct 2009
Location: SW Virginia USA
Posts: 6,314
|
Re: 1998 g16 secondary driven clutch noise
It's good when a plan comes together...
|
02-26-2016, 11:14 PM | #19 |
G8 Specialist
Join Date: Jun 2009
Location: Phoenix
Posts: 7,799
|
Re: 1998 g16 secondary driven clutch noise
If you put that sheave back in, the ramps are going to eat the new shoes in the spring seat. It's damaged beyond reusing.
|
02-27-2016, 09:10 AM | #20 |
G8 Specialist
Join Date: Jun 2009
Location: Phoenix
Posts: 7,799
|
Re: 1998 g16 secondary driven clutch noise
Just observing that black round spot on your tranny case, I'm guessing that is the cross over shaft on the reverser gear. It's suppose to look like this; you may be headed for more problems. The tech's will know more than me!!
Also, have you checked the oil level in the tranny? |
|
|
Similar Threads | ||||
Thread | Forum | |||
Anyone ever pulled a driven secondary clutch | Gas EZGO | |||
Secondary or Driven Clutch Issues | Gas Yamaha | |||
Where to buy new performance driven clutch (secondary)? | Big Block Talk! | |||
G9 secondary (driven) clutch? | Gas Yamaha | |||
ezgo secondary / driven clutch | Golf Carts and Parts |