|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
12-29-2016, 04:22 PM
|
#1 |
|
Not Yet Wild
Join Date: Dec 2016
Location: Beaver Falls, PA
Posts: 23
|
G1 Front Hub removal - How to
I have a Yamaha G1, and the front hubs on both sides wobble. Therefore, I am thinking it is the bearings. I removed the tire, dust cover, pin, and the nut and washer in the hub, but I can't pull off the hub from the knuckle. I'm thinking of getting a gear-pull but don't want to bust up anything since this is a G1 and parts are few and far between. Am I going in the right direction here? Will a gear-pull work in this case?
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
12-29-2016, 04:38 PM
|
#2 |
|
Gone Wild
Join Date: Jun 2015
Location: NW Iowa
Posts: 1,669
|
Re: G1 Front Hub removal - How to
Yeah I used two jaw puller it doesn't take much to get them broke loose
|
|
|
|
|
12-29-2016, 04:42 PM
|
#3 |
|
Not Yet Wild
Join Date: Dec 2016
Location: Beaver Falls, PA
Posts: 23
|
Re: G1 Front Hub removal - How to
Thanks, looks like I'll be making a trip to Harbor Freight tonight.
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Replacing Front Shocks w/o Front Cowl Removal | Electric EZGO | |||
| Front Hub Inner Bearing Removal Help | Gas EZGO | |||
| Front cowling removal | Gas EZGO | |||
| EZ-GO Marathon front cowl removal -- And TXT body removal | Electric EZGO | |||
| EZ-GO Marathon front cowl removal -- And TXT body removal | Gas EZGO | |||
Linear Mode
