|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
01-23-2017, 07:10 PM | #1 |
Not Yet Wild
Join Date: Jan 2017
Posts: 12
|
Replacing two Bearings on the G1 Crankshaft
I just bought a G1 and the engine needed overhauled.. I am going back together with new two bearings.. Do I put the press bearings on the crankshaft first or in the case? I am confused,, I seen different older post doing it either way. Which is best, I have access to a press and hot/cold methods.
Thanks in advance! |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-24-2017, 09:14 AM | #2 |
Gone Wild
Join Date: Mar 2013
Location: DORR MI
Posts: 230
|
Re: Replacing two Bearings on the G1 Crankshaft
I have always pressed the bearings into the case first, then press the two halves together
|
01-24-2017, 09:22 AM | #3 |
Not Yet Wild
Join Date: Jan 2017
Posts: 12
|
Re: Replacing two Bearings on the G1 Crankshaft
Thanks, I got bearings ordered!
|
|
|
Similar Threads | ||||
Thread | Forum | |||
1987 ezgo gas crankshaft bearings specs | Gas EZGO | |||
pressing bearings onto crankshaft | Gas EZGO | |||
Crankshaft bearings on 79 EZGO | Gas EZGO | |||
G1 Engine Rebuild Help Needed - Crankshaft Bearings | Gas Yamaha | |||
Replacing rear wheel bearings | Electric EZGO |