Need help!! With new cart build

[Theflyinglineman]

Good morning,
I recently had a 2014 ezgo TXT built and I have a concern in regards to how the S4 body was mounted. There is a gap toward the tire .I was told that it is normal but that doesn't sit with me. If it is normal when you put an S4 body on a TXT so be it. If it is wrong how do you fix it. Also when I sit on it it feels like I am sitting straight up but the back seat I feel like I am in a lounge chair. I suspect it's because of the way the body is mounted. The way it is i think the back of the front seat is higher which then causes the back seat to be lower towards the front of the cart.

[jneubig]

I had the same gap on mine when I installed the diamond plate rockers. Wasn't there with the factory plastics. Might just be a design issue with the rockers.

[Rooster59]

Hover your cursor over the image to zoom in on the S4 body by the rear fender. Looks like that might be typical.



This one doesn't show the gap, but the stock rocker panel has an upward extending lip that would cover the gap. The gap only shows up with custom rocker panels without the lip. I would say you are going to suffer with a gap.

[orangeman6]

Same story with my chrome rockers.

[Babyboy70363]

I have the same gap on my diamond plate rockers....im going to drill a new hole while holdi g the rocker in alignment and put a bolt and nut through it. You will have to put some type of spacer behind the rocker....im using some pvc cut to size for a spacer.

Sent from my SM-G930V using Tapatalk