|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
02-03-2018, 08:32 PM | #1 |
Gone Wild
Join Date: Jun 2017
Location: San Diego
Posts: 189
|
Nut in front leafs too big for Jake's axle
Am installing a Jake's 4" lift kit on my 92 Marathon, and went to install the new front axle.
The existing nuts at the front of each leaf, used to locate the leaf in the axle, are too big, and won't fit in the holes in the Jake's axle. Using a smaller bolt/nut will have too much play in the bolt shaft. Anyone run into this, and have an easier solution than grinding down the nuts? |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Got HD rear leafs, but less leafs than stock...should I exchange? | Electric EZGO | |||
Rear Axle Clocking with Jake's Lift Kit | Lifted Golf Carts | |||
stock TXT front leafs | Golf Carts and Parts | |||
Need front and possibly rear leafs for 94 | Gas EZGO | |||
cheapest place to get front leafs for an 84'? | Gas EZGO |