|
02-09-2019, 11:35 PM
|
#1 |
|
Not Yet Wild
Join Date: Feb 2019
Posts: 7
|
Removing starter/governor
having starting problems with new cart, just starting to troubleshoot And haven't had a chance to study it, but have searched everywhere with no luck. How hard is it to pull the starter on a precedent gas cart?? Do you pull it from the back/ front ???
Thanks |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
02-10-2019, 09:35 PM
|
#2 |
|
Bonafide Nincompoop
Join Date: Dec 2015
Location: Charlottesburg Va
Posts: 8,987
|
Re: Removing starter/governor
It’s not exactly fun on any cart, but on the precedent you have to go at it from both sides. Once all the bolts are out you should be able to lift it out from under the seat.
To help with some extra room, jack up the rear of the cart so the rear wheels are off the ground and the springs are extended. (Don’t jack it up under the axle) Remember to disconnect the battery negative first. |
|
|
|
|
02-11-2019, 04:45 PM
|
#3 |
|
Not Yet Wild
Join Date: Feb 2019
Posts: 7
|
Re: Removing starter/governor
Ok, thx...I tightened all connections and charged battery overnight and haven't had any more problems so far ( fingers crossed) thanks again.
|
|
|
|
 |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Thinking about removing the governor questions though?? | Gas Yamaha | |||
| Removing/Re installing starter on an EZGO | Gas EZGO | |||
| Removing Governor-GX620 | Big Block Talk! | |||
| Removing Governor Shaft assembly? | Lifted Golf Carts | |||
| Removing Pulley on Starter / Generator | Gas Club Car | |||
Linear Mode
