|
Gas Club Car Gas DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
07-06-2019, 04:18 PM | #1 |
Not Yet Wild
Join Date: May 2016
Location: Griffin, GA
Posts: 66
|
Precedent Lift back to stock
I have an 06 precedent gas that previous owner built his own lift from aluminum stock. It looks like the original front suspension is all in place, but was moved forward and lower to life the front end. As for the back, looks like traditional block to lift but could be a drop spindle. I cannot tell.
Does anyone have a few good pics of stock suspension mounts so I can see sizes of parts compared to mine? I want to return. To stock height for now and need to identify what I am missing and may need to revert. I couldn't find a good picture online or in here for that. I will post pics of mine later for reference |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-06-2019, 05:05 PM | #2 | |
Getting Wild
Join Date: Aug 2017
Location: Eaton. Ohio
Posts: 130
|
Re: Precedent Lift back to stock
Quote:
I have a complete stock suspension I could sell you! I have a 2008 Sent from my iPhone using Tapatalk Pro |
|
07-07-2019, 06:34 AM | #3 |
Not Yet Wild
Join Date: May 2016
Location: Griffin, GA
Posts: 66
|
Re: Precedent Lift back to stock
Can you send pics via dm with price?
|
07-07-2019, 09:55 AM | #4 |
Getting Wild
Join Date: Aug 2017
Location: Eaton. Ohio
Posts: 130
|
Re: Precedent Lift back to stock
|
07-07-2019, 08:09 PM | #5 |
Not Yet Wild
Join Date: May 2016
Location: Griffin, GA
Posts: 66
|
Re: Precedent Lift back to stock
|
07-08-2019, 10:25 PM | #6 |
Not Yet Wild
Join Date: May 2016
Location: Griffin, GA
Posts: 66
|
Re: Precedent Lift back to stock
This is the lift. It appears they used aluminum stock to lower the stock mounting point to raise the front end. Looks like it would go right back to stock location, but I don't know if it's all there correctly.
I can't find a good picture of the rear online to understand why the rear is raised so much. I see no lift blocks. Im assuming they flipped the leaf springs under the axle to lift? Anyone can help me understand before I start spending money on replacement parts. |
07-09-2019, 08:50 AM | #7 |
Not Yet Wild
Join Date: Jul 2018
Location: Texas Coast
Posts: 36
|
Re: Precedent Lift back to stock
On the rear it may be they put longer shackles on the back end of the springs to gain the lift, as well they look like HD springs which may have more arch than stock, but where the spring attaches to the very back of the cart, check the 2 plates sandwiching the springs on each side to see if they are longer than 3". Or post up a picture back there so we can verify.
Also, if you are going back stock, from the looks of one of your pictures, they have reworked the steering shaft (looks like they made a pipe extension), so you may be dealing with changing that out as well. |
07-09-2019, 01:36 PM | #8 | |
Not Yet Wild
Join Date: May 2016
Location: Griffin, GA
Posts: 66
|
Re: Precedent Lift back to stock
Quote:
By the time I redo all of that, buy new shackles, and all probably be better to just get a normal lift to put on versus going back to stock. |
|
07-09-2019, 05:21 PM | #9 | |
Not Yet Wild
Join Date: May 2016
Location: Griffin, GA
Posts: 66
|
Re: Precedent Lift back to stock
Quote:
|
|
07-10-2019, 07:56 AM | #10 |
Not Yet Wild
Join Date: Jul 2018
Location: Texas Coast
Posts: 36
|
Re: Precedent Lift back to stock
Your first 2 pictures kind of show the rear shackle (where the bolt is at the end of the spring) - the shackle is between the frame and very end of the rear of the spring) which looks like a single pc shackle versus the stock double plate shackles. So, most likely it's longer. I agree with you that you're most likely better off buying a reputable lift and changing it out. One last thing, is it looks like they put longer rear shocks on too...which may or may not work with a new lift kit, as they usually put the axle under the springs.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
'02 PDS - Pulled Speed Chip - Won't go back to stock | Electric EZGO | |||
Need help wiring stock key switch back in | Electric EZGO | |||
88 going back stock (big sigh) | Electric Club Car | |||
95 EZGO series cart...Need upgrade kit with everything...or do I go back stock? | Electric EZGO | |||
Changing lifted EZGO back to stock? | Electric EZGO |